0
Add your answer:
Earn +20 pts
How much water used in a ten minute shower in litres?
Can't say because this depends on the flow coming out of the shower head. If the flow is 1ltr per minute then in 10 minutes you will use 10 litres The average shower in the US flows at a rate of 7.9 liters per minute, or 2.1 gallons per minute. A ten minute shower would consume 79 liters or 21 gallons of water.
How do you find volume of your head?
First you need to take of the head and then dump it into a vat of water. Then just calculate the water displacement. This can be done by decapitating the subject.
What will be the Water column Head in kg for 6 meter height and 8 meter dia tank?
Water column head is expressed either as the height of the column ... 6 meters here ... or else as the pressure at the bottom ... 58.842 kPa here. 'Kg' can't be a unit of water column head, and the diameter of the column is irrelevant.
What is the difference between hydraulic grade line and energy grade lines?
Energy gradient line refers to total energy excluding the losses due to flow. ie) Datum Head + Pressure Head + Velocity Head Hydraulic gradient line refers to the line joining upper and lower water surface levels excluding losses and velocity head. ie) Datum Head + Pressure Head
How much water pressure would you get from a 80000 liter tank with 35 meter head?
You get a pressure of about 1 atmosphere (or bar) for every 10 meters.Note:The pressure has nothing to do with the volume of water behind it.It only depends on the depth or head.1 meter = 9,794.7 pa35 meters = 342.815 kpa35 meters = 114.83 feet = 49.72 psiThese figures are only for water in the tank.
When figuring water pump gph how is height figured?
By gph I suppose you mean gallons per hour. Pumps are made with different discharge characteristics, you should have with the pump a graph showing the discharge head or pressure against flow rate. If you only have pressure quoted, 1 bar = 14.5 psi = 30 ft head of water (roughly), so 1 psi = 2 ft water head. If you don't have the characteristic graph you will have to go back to the makers for it
How many gallons of water flow from irrigation head?
sorry don't
How many gallons of water per minute does a low flow shower head use?
About 1.25 gallons per minute.
What is Static Discharge Head?
Static discharge head refers to the pressure at the pump discharge outlet, which is created by the pump's rotation and used to overcome the system's resistance to flow. It is a critical parameter in pump performance calculations and determines the pump's ability to push water through the system. Static discharge head is influenced by factors such as pump design, speed, and the system's piping configuration.
What is Gallons Per Minute of Water at ten Foot of Head?
The flow rate (gallons per minute) will depend on the cross-sectional area of the pipe.
How much water does a 25 minute shower use in gallons?
Obviously it partly depends on the shower head, but most will give about 2.5 gallons per minute, so you are using about 12 gallons of water, possibly about 8 - 9 of it hot.Place a 1 liter bottle below the shower and measure how many seconds it will require to fill it. Then:Number of gallons in five minutes = 78,1/ Number of secondsAn average shower head emits about 1.3 -1.5 gallons per minute, so that would be 7 -8 gallons.
What do you mean by head of pump?
Total pump head is the sum of suction and discharge pressure in mtr. ie. 1 bar =10.33 metres of water column
How much water is saved by taking a eight minute shower than a ten minute shower?
4 gallons if head delivers 2 gallons/minute
Kirloskar monoblock pump range cataloge for pump selection?
Head 30mts Discharge 120 cu.mt water pump
What effects appear if you reduce the diameter of impeller?
Suction head will decrease Delivery head will decrease. Discharge will increase at low suction and delivery head. discharge stagnate at low head than rated head.
What is the landmark of in each second about 150000 gallons of water pour over these falls on the US Canada border?
diamond head
How much water does a 7 minute shower use?
A shower head would use between 60 to 75 gallons for a 30 minute shower.
