You get a pressure of about 1 atmosphere (or bar) for every 10 meters.Note:The pressure has nothing to do with the volume of water behind it.It only depends on the depth or head.1 meter = 9,794.7 pa35 meters = 342.815 kpa35 meters = 114.83 feet = 49.72 psiThese figures are only for water in the tank.
1000 m. of pure water = 100 bar plus atmospheric pressure at say 1 bar = 101 bar. Seawater will be more because the density is higher.
It's a unit of pressure. 1 bar = 14psi (pounds per square inch). Every 6 feet underwater you go, The pressure increases by 1 bar. Therefore - if your watch has (for example) 2 bar written on it, it's capable of taking the water pressure at a depth of 12 feet.
334.6939 ft.
10m (10,000 mm) of water column is about 0.98 bar (P=density*specific gravity*height=1000*9.8*10) 5000 mm WC is 0.49 bar then.
BAR is 60ft head of water
1 bar = 10 metres of water head - so 0.2 bar = 2 metres.
"Bar is the unit of pressure and feet is the unit of length." While this is true, a bar in terms of pressure is 1 bar at sea level. If you go under water 33 feet, it's another bar, so you'd be feeling 2 bars or atmospheres and so on. You'll see some watch ratings in terms of meters, feet, bars, or atmospheres (atm).
25 bar is equivalent to approximately 250 meters (820 feet) of water depth.
One Bar is 10.2 Meters of fresh water or 9.0 meters of saltwater. it is 204 meters for fresh water. and 180 meters in salt water. :-)
You get a pressure of about 1 atmosphere (or bar) for every 10 meters.Note:The pressure has nothing to do with the volume of water behind it.It only depends on the depth or head.1 meter = 9,794.7 pa35 meters = 342.815 kpa35 meters = 114.83 feet = 49.72 psiThese figures are only for water in the tank.
There is a pressure difference in the building only if the system referred to is NOT a closed system. In a closed, pressurized pipe system the pressure is the same throughout. If open, assuming 3 stories x 10 feet/story, one would add the pressure equivalent to 30 feet of water head.
1 Bar represents one atmosphere of air pressure. 10 Bar is approximately equal to 100 Meters of water depth. 1 meter = 3.28083989501 feet. It follows that 100 meters = 328.083989501 feet. Therefore, 10 Bar is approximately equal to the expected pressure at 328.083989501 feet of water depth (not sea level).
The recommended water pressure is 0.5 to 1 bar
A depth of about 33 feet (10 meters) in sea water is required for the pressure to reach 1 bar. This is because each meter of water exerts a pressure of approximately 0.1 bar.
500 mm water column is equivalent to approximately 0.05 bar pressure.
Ah, converting meter head to bar is like painting a happy little tree. You see, 1 meter head is equal to 0.0980665 bar. Just a simple calculation to bring peace and harmony to your pressure units. Remember, there are no mistakes, just happy little conversions.