An arc-minute is 1/60 of a degree. It is not a measure of length, so you can't convert it to inches.
72,980 (rounded)
5.75 degrees.
One minute is six degrees. Multiply however many minutes the hands are apart by six.
44 times in 24 hours.(Considering the hour- and minute-hands only.)
To solve, you need how far is travelled in 1 minute and the circumference of the wheel (in the same units) which gives how far the wheel travels in one revolution; then dividing the former by the latter will give the revolutions per minute: I'll work in inches: There are 63360 inches in 1 mile and 60 minutes in 1 hour, thus: 10mph = 10 x 63360 ÷ 60 inches per minute = 10560 ipm circumference = π x diameter = 26π inches ⇒ revolutions per minute = 10560 ipm ÷ 26π ins ~= 129.3 rpm
A minute of angle is one sixtyeth of an angle. If you had a circle and took one degrees out from it. Then you split that into 60 parts. 1 part would be a minute of angle.
72,980 (rounded)
1 minute is equal to one sixtieth (or 1/60) of a degree.
5.75 degrees.
one i ate all in 16 minute
MOA stands for minute of angle. At 100 yards, one MOA is equal to 1 inch. At 200 yards, it is equal to 2 inches and so on.
One minute is six degrees. Multiply however many minutes the hands are apart by six.
From its basis as one-60th of 1 degree.
The distance depends on how far the relevant point on the minute hand is from its point of rotation. This is because the motion of the minute hand is angular, not linear.
MOA means Minute of Angle. One minute of angle is smaller than a degree. It is used to refer to the accuracy of a firearm. If it can produce 1 MOA, then all shots fired at a common aim point would form a group of 1 inch in diameter at 100 yards. or 1 inches at 200, etc.
It refers to measuring the angle between hits at a given distance. For practical purposes, 1 inch at 100 yards covers 1 minute of angle. That same angle would be 1/2 inch at 50 yards, 2 inches at 200 yds, 10 inches at 1000 yards, etc. If one click of the scope is a 1/4 minute, to move strike of the bullet 1 inch at 100 yards, you would need 4 clicks.
1760 yards = 1 mile. 60 minutes = 1 hour. 36 inches = 1 yard. 50*1760 divided by 60 = 1466 yards 2 feet in one minute Circumference of wheel = pi*36 = 113.0973355 inches 113.0973355/36 = 3.141592654 yards 1466.666666/3.14192654 = 466.8048878 revolutions in one minute So the wheel makes 466 full revolutions in one minute.