answersLogoWhite

0


Best Answer

I don't know but the person who invented it was an airplane mechanic who was fiddling with the springs in a jet, so if you research into it you might be able to find yoru answer

User Avatar

Wiki User

13y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How many inches of coiled flat wire were used to make the original slinky?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Continue Learning about Math & Arithmetic

A wooden board is 40 inches long how long will each piece be if you cut it in half?

If the cut is parallel to the long dimension, then each piece is 40 inches long, but its width is 1/2 of the original board's width. If the cut is parallel to the short dimension, then the width is preserved, and each piece is 20 inches long. If the cut is parallel to to the flat, then each piece is 40 inches long and has the original width, but is only 1/2 the thickness of the original board.


What is the volume of 30 inches x 30 inches?

The volume is zero. "30 inches by 30 inches" is a flat, square place, on a table, a piece of paper, or the ground. You can't put anything in it because it has no "in" .


What is the volume of a dollar bill?

A dollar bill has a flat area of 6.14 inches × 2.61 inches = 16.0254 square inches. The bill is 0.0043 inches thin. If you really need to know the volume of the dollar bill, then the volume is: 6.14 inches × 2.61 inches × 0.0043 inches = 0.06890922 cubic inches.


What are the inequalities describing the flat surface of a washer that is one and a half inches in diameter with an inner hole of diameter three fourths inches?

Given the information in the question, there is no need for any inequality. the flat surface can be described as an equality. Outer diameter = one and a half inches => outer radius = 0.75 inches. Inner diameter = three fourths inches => inner radius = 0.375 inches. Area = pi*(0.752 - 0.3752) square inches. So one possible set of inequalities is 0 < area < 1,000,000,000 sq inches!


When you reflect a figure over a line is the reflection congruent to the original?

only if the mirror is flat

Related questions

In 1945 Richard James invented the Slinky It was made of 87 feet of flat wire coiled into 3-inch diameter circles How many inches of coiled flat wire were used to make the original Slinky?

(87 feet) x (12 inches/foot) = 1,044 inches of flat wire


In 1945 Richard James Invented The Slinky It Was Make Of 87 Feet Of Flat Wire coiled Into 3-inch Diameter Circles. How Many Inched Of Coiled Flat Wire Were Used To Make The Original Slinky?

(87 feet) x (12 inches/foot) = 1,044 inches of flat wire


How tall are rattlesnakes?

When flat on the ground and not coiled, a rattlesnake will be between 1 1/2 and 2 inches tall depending on the overall size of the snake.


How lomg is a slinky?

Each Slinky contains 67 feet of flat steel wire, and weighs approximately 1/2 pound.


How do you use a slinky?

We thank you for adopting a slinky! Now that you have a slinky of your own, you can find many uses for your little friend. Traditional uses involve putting the slinky atop a high object -commonly a staircase. Place the slinky on one flat end, and then tip the top of the slinky, so the other flat end falls onto the next lowest area -in this case, the next stair step. The slinky will then begin to fall down the stairs on its own, flipping and flopping over itself as it goes. If you wish, you may sing the Slinky Song as it does so. Slinkies are also useful for stretching, and particularly loing ones can be used for clumsy games of jumprope, emulating a sine graph (wonderful for distracting physics students!), and wrapping around things. The ends of a slinky can also be used for poking things, but we ask you not to harm anyone with your slinky, for it makes the slinky sad. Remember to take good care of your slinky, lest it get tangled and very hard to unravel. We wish you years of fun with your slinky, and perhaps you'll find even more uses for it.


Does a lobster have a coiled shell?

If you take a rope and coil it up on a flat table, you will get the basic idea of what a coiled shell looks like. Or, you could look at a cinnamon roll which is the culinary equivalent of a coiled shell. I'm going to let you decide....does a lobster look like a cinnamon roll?


What is the opposite of coil?

uncoil or unloopThe opposite action of "to coil" is to uncoil. (The opposite of a coiled path is a straight or flat path.)


How long is a slinky?

The length of a Slinky spring if stretched out strait, or flat, would be the circumference of one turn of the Slinky times the number of turns in the Slinky.The circumference of a circle (shape of a slinky) is calculated as:C = 2 x PI x RWhere: C is Circumference, R is the Radius, and PI = 3.1415...The final equation would be as follows.slinky_length = 2 x PI x R x Each Slinky contains 67 feet of flat steel wire, and weighs approximately 1/2 pound.


A wooden board is 40 inches long how long will each piece be if you cut it in half?

If the cut is parallel to the long dimension, then each piece is 40 inches long, but its width is 1/2 of the original board's width. If the cut is parallel to the short dimension, then the width is preserved, and each piece is 20 inches long. If the cut is parallel to to the flat, then each piece is 40 inches long and has the original width, but is only 1/2 the thickness of the original board.


How does a dog sleep?

A dog may sleep in a number of ways depending on what makes it comfortable. It may sleep on its side, flat on its tummy, or coiled.


What is SIC 3493?

This category includes establishments primarily engaged in manufacturing leaf springs, hot wound springs, and coiled flat springs.


How does dog sleeps?

A dog may sleep in a number of ways depending on what makes it comfortable. It may sleep on its side, flat on its tummy, or coiled.