answersLogoWhite

0


Want this question answered?

Be notified when an answer is posted

Add your answer:

Earn +20 pts
Q: How many lights can you put on 12 gage wire?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

How many amps can a 18guage wire carry for 120VAC decorative lighting use Chrsistmas lights plugged end to end?

usually the box the lights come in tell you how many strands you can put together for 1 plug. the common number is 3 strings of lights per plug so if you get a power strip you can put 3 strings of lights in each plug and if it is a 4 plug power strip you can put 12 strings of light into the power strip


How many lights can you put on one digital or mechanical timer that you can hard wire to the electical box?

That depends on two things: 1. the capacity of the relay that is inside the timer. 2. the current use (watts) of the lights that you are using.


1997 Plymouth breeze 2.0 4cyl I can not get my brake lights and running lights and directionals and backup lights and reverse lights to work anymore fuses are all good?

Either all these lights are fed from one live (+ve) wire and that has broken or you have a bad earth wire (-ve) for all these lights; unless many wires have been damaged. Take a length of wire that can take 30A and connect to the -ve side of battery and connect directly to the -ve side of each light and test. then do the same for the +ve side. Best to put in an in-line fuse to this wire (say 10A) to guard against fire and errors. This will help to track down where the fault is.


On your 1988 cougar when you put on the brakes tail lights go out?

This could because by a bad ground wire. Check the ground wire to make sure it is connected properly and not corroded.


What to do if you want to install new recessed lights in the kitchen the lights that are in the ceiling now do not have a box therefore nowhere to put the ground wire which is on the new light?

See View Discussion below.


How would you hook up a simple 2 wire connect for your Interior lights to your car?

twist the two wires around the other wire, after doing that get the green wire put it in the 3rd socket to the left of the fusion stamp.


You put a radio in your 1989 toy truck ext cab now you have no tail liaghts or dash lights he fuse for the dash lights look good What is wrong?

you got the wires wrong, most likely a ground wire got hooked up to a hot wire. The Orange Illumination Wire is grounding out somewhere this wire should not be hooked up at all on a 1989 model.


Where do you find power for license plate lights?

A license plate light is put on almost every car. The power wire is probably already there. Look close for a loose or unplugged looking wire around your license plate area. If you have no wire you'll have to run one and tie into a running light in one of your tail lights. Hope that helps.


94 Sick Vic. Police Intercepter. How do you rewire the Road Runner Solid state relay its all wired to the lights but 2 wires open Blue and Red.Add a Switch?

yes.what you do is put the blue wire on the red wire and then tie those together to get those lights blinking again.


How much energy does the 43'' Wire Frame Deer with Clear Lights take to operate?

This wire frame deer is not just for holiday decorating. Put him in your back yard for a year-round festive atmosphere. This deer stands 5 1/2' tall and comes with 525 clear lights.


How do you wire a Christmas light to a switch and 9 volt battery?

i wld like to put lightson my motorbike but lights r 240v and bike is 9v how do i do it


When was Put Your Lights On created?

Put Your Lights On was created in 1999.