L*pi*r2 = Volume , where L=100cm , r=(2.5cm/2) 100*3.14*1.752 = 961.625cm2 = 961.625mL = 0.961625L
Assuming the pipe is 100% full then the volume will be the cross sectional area of the pipe times length. Vol = Pi/4 * (diameter)2 * (length) = (3.14/4)*(0.1 m)2*(1 m) Volume is approximately 0.008 m3. 1 cubic meter is 1000 liters so the volume would be about 8 liters.
There need no be any water at all! The capacity of the pipe is 8.11 litres approx.
Volume of the pipe = (pai) (Diam) 2 (Length)/4 = 3.14 x 100 x 100 x 1 /4 = 7350 cubic meter 1 cubic meter = 1000 liter Volume in liters = 7350 x 1000 = 7 350 000 liters
A litre is a measure of volume which requires the measures of extents in three [orthogonal] directions. Only two measures are given in the question.
15 millimetres = 0.015 metreVolume = (pi) R2 L = (pi) (0.0075)2 (100) cubic metres = (pi) (0.0075)2 (100,000) = 17.671 litres (rounded)
The answer depends on the cross section of the pipe and its length.
about 17.7 liters if the pipe is 100% full. Volume of pipe = CA*Length Vol = (pi/4)*(dia.)2*(length) = 0.7854*(0.0225m2)*(1m) = 0.0177m3 1 m3 = 1000 liters, so the answer is 17.7 liters
18.2415 Liter 3 inches=7.62CM 7.62CM=0.0762M 0.0762 squared=0.00580644 then that times pie (3.14)=0.0182415 cubic meters- this is your volume. 1000 Liter is equal to 1 cubic meter. 0.0182415 cubic meters * 1000=18.2415 Liters
There is no such unit of measurement as the "pipe".
The volume of the pipe is [ (pi) x (Radius)2 x (length) ].The radius of the pipe is 50 mm = 0.05 meter.Volume = (pi) (0.05)2 (10) = 0.07854 cubic meter (rounded) = 78.54 litres.That's the volume of the pipe. We have no way of knowing how much watermay be in it. It may be empty, or full of spiders, etc.
A 350-meter section of 76-inch inside diameter pipe has a volume of: 270,500 US gallons of water.
The volume of a pipe with diameter of 1 meter and a length of 2 meters is 1.57 cubic meters.