0
1359.2 litres, approx.
Wiki User
∙ 9y ago
Add your answer:
Earn +20 pts
How many square liters in a 8 feet by 10 feet pond?
not square litres but square metres 80 x 0.30482 = 7.432 metres2 to work out litres need to know the depth, depth in metres x 7.432/1000 will give litres
How many gallons of water are in my pond that measures 18'x7'x 3'?
It's unlikely that your pond has vertical sides and is 3' deep everywhere, but if it were, it would hold 18 * 7 * 3 = 378 cu. ft. of water. Converting the dimensions to metric at the start makes everything easier. 378 * (12^3) * (2.54^3) give you the number of cc's, dividing that by 1000 gives you the number of liters (10703). Dividing THAT by 3.7854 (liters/gallon) gives you about 2828 gallons. A typical pond, however, probably slopes from very shallow at the periphery to maximum depth near the center. This means it likely holds 30 - 40% less than if it had steep vertical sides and a consistent depth (like a typical above-ground pool). Your pond is probably on the order of 1500 - 1900 gallons.
How many gallons of water does a 1 acre pond hold that is 5 feet deep?
1 acre = 43,500 ft2vol = area * depth = 43,500*5 = 217,500 ft31 ft3 is approx. 7.48 gallons217,500 ft3 * (7.48 gal/ft3) = 1,626,900 gallons
Pond is 2 meters x 1 meters x 500 deep. how much water would it hold in liters?
lenght times width times height = volume so whats 2 times 1 times 500?
What metric unit can you use for amount of water in a pond?
Litres.
How many liters pond third of acre 5feet deep?
area = ⅓ acre = 1348.95 m2 depth = 5ft = 1.524 m volume = area * depth = 2055.7998 m3 = 2055799.8 l
Which is the best unit to use when measuring the amount of water in a pond liters or kiloliters?
liters
How many liters of water in a pond measuring 2.1cubic meters?
We have no way of knowing how much water is in any particular volume of space.But 2.1 cubic meters = 2,100 liters .
What unit is used to find the volume of water in the pond?
Liters. Or MegaLiters (x1 000 liters)
How many gallons of water are in a pond that is 3 4ths of an acre with an average depth of 6 feet?
Approximately 1,466,330 gallons of water.
Which scientific process caused the depth of the pond water to decrease?
evaporation because the sun beams down on the pond water and dries it up so the amount of water in the pond decreases.
How many cubic meters in a pond is needed for 65000 thousand liters of water?
65 as a cubic metre is 1000 litres
How many liters of water is in your pond 10ft x 8ft x 6ft deep?
The volume is 13592 litres, approx.
Would you measure a fish pond in liters or kiloliters?
You don't really need to measure the water in a birdbath, just put some in a couple inches deep.
How many square liters in a 8 feet by 10 feet pond?
not square litres but square metres 80 x 0.30482 = 7.432 metres2 to work out litres need to know the depth, depth in metres x 7.432/1000 will give litres
What do you use to measure a pond?
To measure a pond, you can use a measuring tape or a measuring wheel to measure the length, width, and depth of the pond. Additionally, you can use a level to measure the water level of the pond.
How many liters of water does it take to fill a pond 36 inches wide by 48 inches long by 18 inches deep?
509.7 litres
