answersLogoWhite

0

15 lengths. 25 x 3/5. 3/5 is the reciprocal of 5/3, same as dividing.

User Avatar

Wiki User

15y ago

What else can I help you with?

Related Questions

How many amps can a 6 gauge wire hold?

101 amps for chassis wiring and 37 amps for power transmission. This is for short lengths of wire.


How many meter in 1 roll of tie wire?

Common lengths for rolls of tie wire are 100 meters, 50 meters, or 30 meters, but there are other lengths available as well. You would need to check the product specifications or packaging to determine the exact length of tie wire on a particular roll.


1880-barbed wire stoping open range wars?

The price for barbed wire in 1880 was about 11.95 for about 250 yards. The price for barbed wire in 1880 was about 11.95 for about 250 yards.


How did troops clear barbed wire at the Normandy invasion?

One of the main tools for removing barbed wire was the Bangalore torpedo, which are lengths of metal pipe filled with an explosive, the lengths are screwed together slid under the wire and then set off.


What do wire do?

barbed wire was inventted to keep cows and other animals out of other peoples pastures or yards


What did barbed wire do?

barbed wire was inventted to keep cows and other animals out of other peoples pastures or yards


What unit of measure will you use for the electric wire?

meters, yards, or feet


An electrician needs 9.45 m of wire Wire is sold in lengths of whole meters How much should he buy?

10 then he can cut it


What gauge wire do you need to carry 240 volts 1000 yards?

Wire sizes are governed by the amperage the wire is to carry. To answer this question the load current is required.


How many lengths of wire 45 cm long could be cut from a roll four and a half meters?

4.5 meters = 450 cm 450/45 = 10 pieces


How long is a roll of a bare wire fence?

A roll of bare wire fence typically comes in lengths of 50 feet to 330 feet, depending on the manufacturer and the specific type of wire being used.


Do you have change the speaker wire provided on your Yamaha home theater?

No, you don't have to change the wire, but the wire supplied with most all-in-one systems is quite thin. If you are running the wire for long lengths, you might consider upgrading to a thicker wire to minimize the signal loss.