The current splits up and takes as many paths as there are available. Every path that
exists conducts current. There's no such thing as a parallel branch of a circuit that has
no current through it when others do have current through them..
The lines can be infinitely long, but they will never cross paths.
one
When done properly, the flow of coolant is less congested and there is no single component in line that receives coolant preheated by every other component.
no, the correct matrix to use is PQRS P1010 Q0101 R1100 S0010
Here are some: They can be (1) coincident, (2) intersecting at one point, (3) coplanar but non-intersecting (ie parallel), (4) non-coplanar, non-parallel and non-intersecting (eg paths of a rail line and of an elevated road going over it - from above, they may appear to intersect but they do not), (5) intersecting at two points (eg longitudes on the earth). etc.
In a parallel circuit, the current flow is independent in each branch.
parallel paths are conductors where current direction is same
In parallel connections voltage will be same in all paths, only current will differ. That's why its widely used in home connections
Series has one path. Parallel two or more paths.
A series is an electric circuit with a single path.A parallel circuit is an electric circuit with multiple paths.
The line current increases when more bulbs are switched on in parallel, since more parallel current paths results in lower effective resistance. The line voltage should not change in response to any normal use of electric power in a single house.
For parallel circuit, there's bronchus which mean the electric current'd have to choose which path to go. There's a main loop and more than one bronchus.If the bulb in one of the bronchus break down,the other bulbs would still light up. For series circuit,there's only one path for the electric current to flow through.If one of the bulb breaks down,the other'd go out as well. The electric current of evbery bulb in a series circuit is the same while the electric current of bulb in parallel circuit are not the same. The sum of the bronchus in a parallel circuit is equal to the main loop's.The more bulbs in a path,the more resistance will there be and less brighter it will be.A larger current will flow through the path with lower resistance so te brightness of the bulb of the bronchus will hace differences asc well.
DATA WILL BE SENT IN DUAL YET IN SERIES DATA WILL BE SENT IN ASINGLE LINE
At least two.
At least two paths. Current will divide between them according to their relative impedances.
This is a parallel circuit, each of the parallel current paths draws a certain current, and the input current equals the output current, so the sum of all current through each path has to equal the total current.
If each lamp is connected in parallel, then there are three 'paths' that draw current from the supply.