0
There is no direct correlation between volume (cubic feet) and weight. You must specify the material to be measured or the density of the material.
For example, one cubic foot of down feathers is pretty light. One cubic foot of water is about 65 pounds.
Wiki User
∙ 14y ago
Add your answer:
Earn +20 pts
How many cu. ft. are in a pound?
Cubic feet is a measure of volume (i.e. a cube measuring one foot x one foot x one foot). Pounds is a measure of weight (mass). Therefore the relationship between cubic feet and pounds is called density (lbs per cubic foot) and will vary for each substance: a gas (at atmospheric pressure) will have less than one pound per cubic foot, while a block of wood will have a density of approximately 60 lbs per cubic foot.
How much does 2 cubic feet of cedar mulch weigh in pounds?
Roughly about 30 pounds per cubic foot, so 2 cu ft is about 60 pounds
How many cu ft in lbs?
Without knowing a cubic foot of WHAT- there is no way to answer your question.
How many gallons of water in a 9 foot by 13 foot pool that is 3 feet deep?
Find the volume of the pool (in cu ft) and multiply by the number of gallons of water per cubic foot. Volume = 9x13x3 = 351 cu ft 351 x 7.481 (gal per cu ft) = 2625.831 gal
How many inches in 1 cu ft?
there are 1728 cubic inches in a cubic foot. (12x12x12)
How many pounds of damp plaster sand equals 3 cu ft?
Plaster= 53 pound per cubic foot 53x3=159 pounds
How much does one cubic foot of water weigh in lbs?
1 foot = 30.48 cm, cube this for volume in cu cm = 28316.85 cu cm, weight at 1 g / cu cm (density of water) = 28316.85 grams = 28.31685 kgs, then * 2.2046 ( kgs > pounds) = 62.43 pounds
What does asphalt weight?
Wet asphalt weighs about 145 pounds per cu. foot.
How many tons of gravel will it take to fill a hole 10 foot by 12 foot that is 72 inches deep?
10 ft x 12ft x 72 inches/12 inches/foot = 720 cu ft There is 105 pounds of gravel per cu ft, or 105* 720 = 75,600 pounds At 2000 pounds per ton, that is 75600/2000 = 37.8 tons
How many cu. ft. are in a pound?
Cubic feet is a measure of volume (i.e. a cube measuring one foot x one foot x one foot). Pounds is a measure of weight (mass). Therefore the relationship between cubic feet and pounds is called density (lbs per cubic foot) and will vary for each substance: a gas (at atmospheric pressure) will have less than one pound per cubic foot, while a block of wood will have a density of approximately 60 lbs per cubic foot.
How many pounds in 20 cubic feet?
None, since there can be no such conversion.A pound is a measure of mass. A cubic foot is a measure of volume. The two measure different things and, according to basic principles of dimensional analysis, conversion from one to the other is not valid. If you are not convinced, consider a cubic foot of water. How many pounds? Next consider a cubic foot of lead. How many pounds?
How many pounds of fish is there in a cubic foot?
It depends on the type of fish, whether or not they are wet, and whether or not they are whole, cleaned, or pureed.
How many pounds of chicken manure in 1 cu foot?
Probably 20lb, because Kellogg sells 30lb bags that are listed on their website as 1.5cu.
How much does 2 cubic feet of cedar mulch weigh in pounds?
Roughly about 30 pounds per cubic foot, so 2 cu ft is about 60 pounds
250 inch pounds equals how many foot pounds?
255 inch pounds = 21.25 foot pounds.
How many pounds does a cubic meter of wood weigh?
Each type of wood has a different weight per unit volume. Some commonly used kinds of wood are pine, fir, spruce and cedar. Pine weight ranges from 27 to 45 pounds per cubic foot. For one cubic meter, multiply by 27. Douglas fir weighs about 33 pounds per cubic foot. Spruce (dry) weighs 28 pounds/cubic foot. Red cedar weighs 24 pounds/cu. foot.
How many kips is equal to 1 foot pounds?
1,000 pounds force
