0
How many revolutions of the disc in energy meter is taken as 1 unit?
Wiki User
∙ 14y ago
The number of revolutions the disk in a kWh meter needs to make to produce a read increase of one unit (1 kWh) is 1000 divided by the disk constant. The disk in a meter with a 7.2 constant (Kh = 7.2) will have to make 138 and 8/9 revolutions to make the right most dial in the meter increase its read by one unit.
Wiki User
∙ 14y ago
Add your answer:
Earn +20 pts
Does electric utility meter read real power or apparent power?
Energy meters monitor the supply voltage and the in-phase component of the load current -in other words, they read true (real) power not apparent power which, when time is taken into account (i.e. by the rotation of the meter's disc), results in a measure of energy consumed.
When the eregy meter auminium disc rotates faster what should be done for the magnetic pole whether it should be tightened or loosed?
hello mr me donk no mich stuff me retard how am i supposed to no you woopwoop
What does it mean when a DVD player shows 'No disc' sign?
it means that there is no disc in the DVD player
Will you explain about the outflow from the accretion disc?
Whats an accretion disc? Accretion disc is a disc of matter that falls on the black hole. It rotates around it rapidly, heating up and emitting radiation. Jets are due to twisting magnetic fields that if there are appropriate conditions cause particles from the disc to escape along its axis, forming jets.
How do you make a electric meter into a lamp?
Learn a little about - or all about electricty, voltages, current, watts and a few other parameters that are needed to know what aspect you want to attack. You have to know what energy is to trace the grandaddy.
How many rotations of a meter is a kilowatt hour?
for a disc type (electromechanical) meter the number of disc revolutions to indicate 1 kwh would be found by the formula 1000/ Kh, the watthour constant of the meter.
What creep in energy meter?
The Aluminium disc in energy meter continues to slowly rotate even if no current is supplied to the current coil . This rotation of the disc is known as creep .
Why the disc used in energy meter has two small holes in its construction?
a small hole drilling in the disc ofenergy meter is to avoid
What is creep in energy meter?
In some energy meters, the disc rotates slowly and continuously when there is no load.the rotation of disc without any current through current coil and only due to excitation of pressure coil is called creeping.
What is the purpose of the energy?
Energy meter works on the same principle as the induction motor. An aluminium disc is placed inside a magnetic core with two limbs. One carries a voltage coil so its flux is proportional to voltage, the second carries a current coil so its flux is proportional to current. The two fluxes induce eddy currents into the disc, each of which interacts with the flux of the other to produce a torque, which accelerates the disc. This torque of course is proportional to flux × the eddy current, which equates to V × I, or power. A permanent magnet creates another eddy current resulting in a torque proportional to speed that brakes the disc, the combined result of these actions is that the speed of the disc is proportional to power, and the total number of revolutions is proportional to the energy that has passed through the meter. The disc drives a chain of gears that turn a mechanical counter, called a 'register'.
What does Rr stand for on a kilowatt hour meter?
Rr is the number of disc revolutions required to make the right side (units) dial of the register rotate 360 degrees to register 10 kwhs.
Working of single phase energy meter?
An electric meter or energy meter is a device that measures the amount of electrical energy supplied to or produced by a residence, business or machine.The most common type is a kilowatt hour meter. When used in electricity retailing, the utilities record the values measured by these meters to generate an invoice for the electricity. They may also record other variables including the time when the electricity was used.Modern electricity meters operate by continuously measuring the instantaneous voltage (volts) and current (amperes) and finding the product of these to give instantaneous electrical power (watts) which is then integrated against time to give energy used (joules, kilowatt-hours etc). The meters fall into two basic categories, electromechanical and electronic.Electromechanical metersThe most common type of electricity meter is the Thomson or electromechanical induction watt-hour meter, invented by Elihu Thomson in 1888.[1][2]Technology The electromechanical induction meter operates by counting the revolutions of an aluminum disc which is made to rotate at a speed proportional to the power. The number of revolutions is thus proportional to the energy usage. It consumes a small amount of power, typically around 2 watts.The metallic disc is acted upon by two coils. One coil is connected in such a way that it produces a magnetic flux in proportion to the voltage and the other produces a magnetic flux in proportion to the current. The field of the voltage coil is delayed by 90 degrees using a lag coil. [1]This produces eddy currents in the disc and the effect is such that a force is exerted on the disc in proportion to the product of the instantaneous current and voltage. A permanent magnet exerts an opposing force proportional to the speed of rotation of the disc - this acts as a brake which causes the disc to stop spinning when power stops being drawn rather than allowing it to spin faster and faster. This causes the disc to rotate at a speed proportional to the power being used.The type of meter described above is used on a single-phase AC supply. Different phase configurations use additional voltage and current coils.ReadingThe aluminum disc is supported by a spindle which has a worm gear which drives the register. The register is a series of dials which record the amount of energy used. The dials may be of the cyclometer type, an odometer-like display that is easy to read where for each dial a single digit is shown through a window in the face of the meter, or of the pointer type where a pointer indicates each digit. It should be noted that with the dial pointer type, adjacent pointers generally rotate in opposite directions due to the gearing mechanism.The amount of energy represented by one revolution of the disc is denoted by the symbol Kh which is given in units of watt-hours per revolution. The value 7.2 is commonly seen. Using the value of Kh, one can determine their power consumption at any given time by timing the disc with a stopwatch. If the time in seconds taken by the disc to complete one revolution is t, then the power in watts is . For example, if Kh = 7.2, as above, and one revolution took place in 14.4 seconds, the power is 1800 watts. This method can be used to determine the power consumption of household devices by switching them on one by one.Most domestic electricity meters must be read manually, whether by a representative of the power company or by the customer. Where the customer reads the meter, the reading may be supplied to the power company by telephone, post or over the internet. The electricity company will normally require a visit by a company representative at least annually in order to verify customer-supplied readings and to make a basic safety check of the meter.AccuracyIn an induction type meter, creep is a phenomenon that can adversely affect accuracy, that occurs when the meter disc rotates continuously with potential applied and the load terminals open circuited. A test for error due to creep is called a creep test.
What is meant by creeping in energy meter?
Hii creep is a phenomenon that can adversely affect accuracy, that occurs when the meter disc rotates continuously with potential applied and the load terminals open circuited. A test for error due to creep is called a creep test.
Why is the rotor disc of energy meter made thin?
Aluminium is a good conductor but it is non magnetic material and therefore cannot be altered by magnetic currents and run true and hence it is preferred.
What what 45?
A seven inch disc played at 45 RPM (revolutions per minute) on a turntable; also known as a "single".
What is a 45?
A seven inch disc played at 45 RPM (revolutions per minute) on a turntable; also known as a "single".
Is the bio disc sorcery?
I can produce bio disc and energy pendnats and many energy product etc. if you want to understand bio disc and energy pendants please reply : ph:008613713433929 email:dgsoul@foxmail.com thank you
