Want this question answered?
The outer radius is 20/2 = 10 inches
A wheel with a diameter of 12 inches will have an angular speed of 560.2 revs per minute.
radius
radius=13 area=40.82 circumfrence=8.28025477707
The speed ratio of a bicycle is the (gear ratio* radius of the wheel)/ Length of the pedal arm.
roughly 62 (61.897846)
5000 revolutions in 11000m = 1 revolution every 2.2m Circumference is 2.2m Circumference is diameter times pi 2.2m dividied by pi divided by 2 (to go from diameter to radius) = 35.014cm
Find how far one revolution goes - this is the circumference of the wheel; from this the radius can be calculated: 1000 revolutions = 628m 1 revolution = 0.628m =62.8cm Circumference = 2{pi}radius (pi ~= 3.14) radius = circumference / 2{pi} ~= 62.8cm / (2 x 3.14) = 62.8cm / 6.28 = 10cm
1 revolution = 2PI radian. 2 revolutions = 4PI radian The angular speed of the Ferris wheel is 4PI radians . Multiply by the radius. The linear speed is 100PI feet per minute.
The relationship between revolutions per minute (RPM) and relative centrifugal force (xg) is: g = (1.118 × 10-5) R S2 where g is the relative centrifugal force, R is the radius of the rotor in centimeters, and S is the speed of the centrifuge in revolutions per minute. You can use this for any centrifuge, just measure the radius of the rotor from the center to outer edge.
One formula is: centripetal force = speed2 / radius. Solve it for speed, then convert that to revolutions per second.One formula is: centripetal force = speed2 / radius. Solve it for speed, then convert that to revolutions per second.One formula is: centripetal force = speed2 / radius. Solve it for speed, then convert that to revolutions per second.One formula is: centripetal force = speed2 / radius. Solve it for speed, then convert that to revolutions per second.
If the wheel made 3000 revolutions and covered 45000 pi inches, then one revolution would cover 15 pi inches. That is the circumference. The circumference is equal to 2 times the radius times pi. Then the radius is 7.5 inches.
Assuming rmp means revolutions per minutes, 2*r*pi*rpm (inches/minute).
In each revolution, the wheel would advance 2 x pi x radius. Multiply this by the number of revolutions.
Distance is number of revolutions times circumference. So divide the distance by the revolutions to get the circumference. Then divide the circumference by pi to get the diameter, and divide that by 2 to get the radius.
The outer radius is 20/2 = 10 inches
revolutions are angular velocity (w), so you need to know radius (r) to convert to velocity (v) meters per second. not linear velocity. v = wr. For example 30 revs per min is 30/60 revs per second; over a 2 meter radius velocity is 30/ 60 x 2 = 1 meter per second