0
How many rolls of felt do you need to cover 10 square coverage?
Wiki User
∙ 11y agoWant this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
How many rolls of 15lb roofing felt to cover 2000 sqft?
Five--a roll will cover 400 square feet of area.
How much plywood for a 23 square roof?
When talking roofing materials. A square is considered a 10'x10' area or a 100 square feet. So you have 1,900 square feet. There are two basic types of felt: 15lb and 30lb felt. 15lb felt covers 4 sq= Total needed will be 5 rolls 30lb felt covers 2 sq= Total needed will be 10 rolls (*note, 30lb is more thick and better for your roof.
How much felt paper covers 1000 sq. ft.?
4 rolls per square. 100 square feet to a square.
How much area does a roll of rolled roofing cover not shingles?
Roofing paper, or felt, normally comes in about 150ft rolls and are 3ft wide. Figure about 450 square feet of felt. Remember when estimating required amounts that you need to overlap the felt about 6 inches or so. With an overlap of 6 inches, 1 roll has a coverage of about 375 square feet.
How many sq ft of a roof does a 30Lb felt cover?
A Standard roll of 30lb felt will cover 2 square or 200 sq ft
How many rolls of 15 pound felt paper does it take to cover 8 squares?
1 square = 100 square feet x 8 squares = 800 square feet. 15# felt comes in different sizes. Multiply the length of the roll x the width of the roll to find out how many square feet are in a roll. 800 divided by the square feet per roll = how many rolls you need.
How many rolls of felt paper would it take to cover 11 squares?
15 lb. has 400 sq. ft. per roll and 30 lb. has 200.
How much area can roofing felt measuring 1 meter wide and 8 meters long?
It can cover 8 square metres or 86 square feet or 9.567 square yards.
How many yards of felt are in 11 rolls if each roll has 56 yards of felt?
616 yards
How many square feet does a roll of 30 pound felt paper covers?
Easy way to figure it: If the roll is 3 feet by 100 feet, it would cover 300 square feet. But you have to overlap it about 6 inches at top and bottom, so once you subtract that, it would cover about 200 square feet., When figuring a job, add some for overlap at valleys, chimneys, etc. . . Hope this helps. A standard roll of 30# felt covers 216 square feet; one-half the area of a roll of 15# felt, which covers 432 square feet. Rows are overlapped 2 inches, not 6 inches.
Why is the momentum of a billiard ball change as is rolls on a billiard table?
The answer is rather simple. Even though a billiard ball is smooth, when it rolls it imparts some of its kinetic energy to the felt covering of the table. That is, the felt heats up a bit as the ball slows down.
Why was Taylor swift on the cover of rolling stones?
she felt like it
