You would multiply 2 times 1.33. that would give you 2.67 square feet.
A 56-inch diameter circle has an area of about 17.06 square feet.
1 acre = 4,840 square yards = 4,840 x 9 square feet = 43,560 square feet. 1 square foot 1 inch thick equals 1/12 of a cubic foot, so 43,560 square feet 1 inch thick equal 1/12 x 43,560= 3,630 cubic feet.
625 inches = 1,587.5 centimeters.
If 36 inches is the diameter the answer is: 7,068 square feet.
A 12 inch by 12 inch square is one square foot. That means it would take 15.
A 12x12 inch paver is one square foot. So you would need 240 square feet.
128; each paver is half a square foot.
90 pavers. First, convert 16 inches (the length of the side) into feet so that you can work with all of the numbers in the same way. 16 inches/12 inches per foot = 1.333 feet. Then, square the length of the side to get the area of one paver. 1.332 = 1.777... Then, divide the total area (160 square feet) by the area of one paver (1.777 square feet) to get the total number of pavers. This is 90 pavers.
Each paver is 12" x 12" or 1 square foot. So, 200 ft2 * (1 paver/ 1 ft2) = 200 pavers
2.78 square feet.
2.77 square feet.
A 16 inch by 8 inch paver is 128 square inches which is equal to .89 square feet. Since a square foot is 12 inches by 12 inches which when multiplied equals 144 square inches, so 128 divided by 144 = .88888... or .89. so 225 square feet divided by .89 square feet per paver = 252.8 pavers or 253. Depending on pattern and outline you should probably add up to 10% for waste if the area will require a lot of cuts. If it is a simple rectangle laid parallel to sides then add as little as 2%or less for waste and edge fill in. So maximum of 278 to minimum of 253.
2.25 square feet.
square feet
3.5555 square feet.
Approximately 179.17 square feet.
Approximately 222.54 square feet.