Pangit si jungene maril muka siyang unggoy
hahaha pwet ng kabayo
That depends on the mass, pressure, and temperature of the air in the cubic meter.
No. The Wikipedia lists units of J/(g x K) for some materials. Of course, to consistently use SI units, kilograms should be used instead of grams.
The answer will depend onthe ambient temperature, and other atmospheric conditions,the temperature to which the house is heated, andthe insulation of the various materials in the house.
Tell me how to comprehend a tesseract, then I will help you...
approx 80,000 if your house has average insulation and heat loss.
5M Detector to Detector
A heat detector is connected to a fire alarm system. It is designed to respond when the heat sensitive element has increased temperature due to a fire.
I am not personally familiar with the ademco heat detector, but I have done some research and have found that this head detector is pet immune, and pets do not cause interference with this heat detector security system.
first optical smoke / heat detector to second optical smoke/heat detector maximum distance.
A heat detector is a good addition to the smoke alarm. It will help to detect a heat source that is growing in case the smoke alarm in the home is not functioning.
You need 100W per square meter. 100W equals around 341.3BTU. 1 square meter are around 10.7 square feet. You therefore need around 32 BTU per square foot.
For a new build it can cost between £9 - £12 per square meter depending on level of insulation and heat source.Generally when using a heat pump you want to put more pipe in the floor so you can run your heat pump as low as possible.
no
A Bolometer.
Then it wouldn't be a smoke detector, but there are fire alarms that are triggered by temperature.
yes you can disable it by covering the motion detector. remember the detector works with heat and if is cover no signal will be register only a ligth switch will over rite the sensor if you turn the ligth on is going to stay on all ways is not turning of that's y you can disable it
The insect would cause distruption for the heat detector and it would stop working. Oh also the insect dies...LOL