0
How many times can a bolt be torqued before it must be replaced?
Wiki User
∙ 15y agoWant this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
What is 40 yards of cloth called?
in medieval times a standard bolt of cloth was 40 cloth-yards (37 inches) in length
What does the grade 8.8 bolt identification refer to?
he diameter of the bolt.
How do you reset a combination on a kwickset bolt lock?
Undo the bolt
How do you calculate weight of bolt and nuts?
1/2"x2" m.s bolt
How do you dissassemble a Stevens 416 bolt?
Open the bolt and rack it back. Hold back the trigger. The bolt should slide easily backwards until it detaches from the rifle. If you have a rear sight that blocks the bolt from being removed, simply rotate the bolt handle clock-wise to get it passed the sight and remove as usual.
What is the difference between bolt and screw?
If it assembled into a tapped hole, it is a screw. It is tightened (torqued) at the head. If it used witha nut, it is a bolt. It is tightened (torqued) at the nut. Otherwise, it is the same piece of hardware, only the use is different
How do you know if you've torqued it down enough?
You'll need a torque wrench and the torque specifications for that bolt .
What should the heads on a VW 1600 cc motor be torqued to?
which part? every type of nut or bolt is different
What is the Head bolt torque kodiak 400?
The head bolt torque specifications are 150 pounds per square inch. The head bolts should be torqued in 50 pound intervals.
How 89 turbo supra head bolt specs?
factory bolt spec is 58 i believe this is the cause of the blown head gasket issue with the cars it needs torqued at least to 70
What is the head bolt torque for Lexus ls400?
The Lexus cylinder head bolt torque specification is 150 pounds. The cylinder head bolts should be torqued in 50 pound intervals.
What are the head bolt torque specs for a 2002 kia sportage?
The 2002 Kia had bolt torque specification is 160 pounds. The head bolts should be torqued in 40 pound intervals.
What is the 4G13 P SOHC cylinder head bolt torque specs?
Tighten the bolt in the sequence until each is torqued to 49 Nm, then completely loosen all the bolt then re-tighten them in sequence once again until each torqued 20 Nm. tighten each bolt again by 90 degree in accordance with the tightening sequence. After that tighten each bolt again by 90 degree in accordance with the tightening sequence. Some mechanics will refer this method as "20+90deg+90deg"
What will happen if a head bolt is over torqued on a 2001 Yamaha yz426f?
Broken fasteners, engine crankcase thread damage, etc.
What is the head bolt torque for a Briggs and stratton engine model 123K02?
Head Bolts should be torqued at 185 inch pounds
Ford mustang 2000 lower intake bolt torque spec?
all bolts torqued to 15-22 ft lbs.
What is the rod bolt torque on a 1.8liter toyote corolla?
The Toyota Corolla 1.8 liter engine rod bolt torque specification is 120 pounds. The bolts should be torqued in 40 pound intervals.
