Want this question answered?
On a 2002 Envoy you turn the key to run but don't start it. Then push and release the gas pedal 3 times within 5 seconds. The change engine oil light should blink for 5 seconds meaning you have reset the system. If it doesn't blink for you do the procedure again.
Turn the key to the run position and depress the accelerator 3 times to the floor within 5 seconds. The light should blink and then go out.
1 hour = 3,600 seconds24 hours = (24 x 3,600) secondsThere are (24 x 3,600/6) periods of 6 seconds in 24 hours.In that many periods of 6 seconds, there are (24 x 3,600 x 5/6) blinks = 72,000 blinks.
It's telling you that you have a problem. Get a code scanner and find out what the problem is. that's a misfire .i had tht problem and i changed the spk plug cable
Turn the key to the run position and depress the accelerator 3 times to the floor within 5 seconds. The light should blink and then go out.jd
first you nee to check and see if your car is referred to as OBDI or OBDII if its ODBI then you start with the car off.. turn the key to run but do not start the engine.. at this point you have less that 5 seconds to push the gas pedall all the way to the floor and press the overdrive button five times... then the check engine light will stay on.. and then blink... next its going to blink out the code for you for ex. blink-pause-blink blink-pause blink blink blink-pause blink n that would mean the problem code is 1231 just Google BMW problem codes and use that dcode to find out what the issue is..
why does my airbag light blink off and on on my 92 mercury gran marquis ls
Star doesn't blink but they appears to blink when light from the furthest star get reflected variably from our atmosphere
Turn the key to the run position and depress the accelerator pedal to the floor 3 times in 5 seconds. The light will blink and then go off.jd
all three lights will be on every twelve seconds, or five times per minute. 5 (times per minute x 240 (minutes in 4 hours) = 1200.this is assuming that the duration of the light being on is an immeasurable instant.
we all do it and don't know how.it is a natrial reactin are you stupid didn't you know that
Turn on the ignition but do not start the engine. Depress the accelerator to the floor 3 times within 5 seconds. The oil light should blink and then go out.jd