The voltage that a wire can have suppressed upon it is governed by the rating of the insulation that surrounds the wire. Common insulation voltages are 300, 600 and 1000 volts.
Watts = Amps x Volts x Power Factor Maximum value of PF is 1 for a resistive load. If you have 120 volts and a PF = 1, then amps = 10.
240 volts maximum.
20cm=200mm
Watts = Amps x Volts x Power Factor Maximum value of PF is 1 for a resistive load. If you have 120 volts and a PF = 1, then amps = 10.
36.6 amps maximum at 120 volts, but should not be loaded to over 29 amps. At 240 volts it will produce a maximum of 18.3 amps but never loaded to any more than 14.6 amps.
26
Watts = Volts x Amps So you need to know the current. This is only for resistive load.
6 amperes
There are zero amps in 3000 volts. A load needs to be connected to the voltage.
200mm
200mm
0.2