Power equals voltage times current in amps. The value of amps used is needed to do the math.
To determine the amperage required by a 12-volt audio radio, you would need to know the power consumption of the radio in watts. You can then use the formula: Amps = Watts / Volts to calculate the amperage.
The formula to calculate the relationship between amps, volts and watts is Volts X Amps = Watts or Volts = Watts / Amps or Amps = Watts / Volts therefore; 200 Watts divided by 1.95 Amps is 102.5641 Volts.
To convert watts to amps at 120 volts, use the formula: Amps = Watts / Volts. For 1500 watts at 120 volts, the calculation would be: 1500 watts / 120 volts = 12.5 amps.
It depends on what kind of amp it is. Is it an audio amp or an rf amp . . A 3 kW audio amp would draw about 300 watts on average at most, so with a good reservoir capacitor the supply current would be 0.2 amps. A 3 kW rf amp for AM radio would draw about 4500 watts so the supply current would be 3 amps.
To determine the amps for a halogen lamp, divide the wattage of the lamp by the voltage it operates on. The formula is: Amps = Watts / Volts. This will give you the amperage required for the halogen lamp.
The amps required for a device depend on its power consumption. You can calculate the amps by dividing the power rating (in watts) by the voltage (in volts) of the device. For example, a 1200 watt device plugged into a 120-volt outlet would require 10 amps (1200 watts / 120 volts = 10 amps).
amps equals watts divided by volts.
To find the voltage required to send a current of 4 amps through a resistance of 60 ohms, you can use Ohm's Law: V = I x R where V is the voltage, I is the current, and R is the resistance. Plugging in the values: V = 4 amps x 60 ohms V = 240 volts So, you would need 240 volts to send 4 amps through a 60-ohm resistor.
The formula is volts times amps equals watts, or watts divided by volts equals amps.
Watts = Amps x Volts x Power factor Hence, more information is required to answer your question.
The formula to calculate the relationship between amps, volts and watts is Volts X Amps = Watts or Volts = Watts / Amps or Amps = Watts / Volts therefore; 200 Watts divided by 1.95 Amps is 102.5641 Volts.
Ohm's law: Volts = Amps * Ohms, or Amps = Volts / Ohms 12 volts / 0.5 ohms = 24 amps
To convert watts to amps at 120 volts, use the formula: Amps = Watts / Volts. For 1500 watts at 120 volts, the calculation would be: 1500 watts / 120 volts = 12.5 amps.
4 volts and how many amps? Watts = amps x volts. It depends on the amount of current (in Amps) flowing at 4 Volts... See Ohms Law: Watts = Volts x Amps If you have 2 Amps flowing at 4 Volts you are dissipating/consuming 8 Watts. If you have 10 Amps flowing at 4 Volts you are dissipating/consuming 40 Watts.
It depends on what kind of amp it is. Is it an audio amp or an rf amp . . A 3 kW audio amp would draw about 300 watts on average at most, so with a good reservoir capacitor the supply current would be 0.2 amps. A 3 kW rf amp for AM radio would draw about 4500 watts so the supply current would be 3 amps.
Volts and amps measure two different things. Volts are used to measure potential difference. Amperes (amps for short) are used to measure current. Compare it to a garden hosepipe: Voltage corresponds to the pressure of the water, current measures how fast the water flows. 2000 millivolts equals two volts. For comparison, a single AA cell gives 1.5 volts. 1000 amps is several times the current used by the average household. A regular AA cell can provide, at maximum, about half an amp.
6 amps.
160 amps at 12v.