Volts and Amps are measurements of different things. Volts can be viewed as similar to pressure in water, where Amps can be equated to the volume of water that flows in a hose.
So a battery with a circuit connected can be considered in terms of a water tank with a hose attached. The Tank provides potential energy as water pressure (Volts in the battery), the hose in the circuit which will allow current to flow when switched on (Current in Amps in an electric circuit.
The size of the hose (Resistance in an electric circuit) as well as the water pressure will determine how much water will flow, (Current).
So you can have Voltage with no current - Full water tank but taps closed, but you can't have current with out voltage - If the tank is empty (battery flat) no water can flow.
The relationship between Volts (V), Amps (I) and Resistance (R) is called Ohms Law and is as follows:
V = I x R
So if in the circuit the resistance was 1 Ohm then 136 Amps would require a voltage source of 136 x 1 = 136 Volts, however if the resistance of the circuit was 10 Ohms the the voltage source would be 136 x 10 = 1,360 Volts.
160 amps at 12v.
160 amps at 12v.
Ohm's law: Volts = Amps * Ohms, or Amps = Volts / Ohms 12 volts / 0.5 ohms = 24 amps
4 volts and how many amps? Watts = amps x volts. It depends on the amount of current (in Amps) flowing at 4 Volts... See Ohms Law: Watts = Volts x Amps If you have 2 Amps flowing at 4 Volts you are dissipating/consuming 8 Watts. If you have 10 Amps flowing at 4 Volts you are dissipating/consuming 40 Watts.
The formula to calculate the relationship between amps, volts and watts is Volts X Amps = Watts or Volts = Watts / Amps or Amps = Watts / Volts therefore; 200 Watts divided by 1.95 Amps is 102.5641 Volts.
It depends on how many Amps (current) are applied to the voltage. Watt = Volts x Amps. e.g. 12 volts @ 5 amps = 60 watts
It's not that simple. The basic formula is Volts / Ohms = Amps. For 30 Volts you'd get 0.5 Amps, for 60 Volts you'd get 1 Amp, for 120 Volts you'd get 2 Amps.
It depends on how many Amps (current) are applied to the voltage. Watt = Volts x Amps. e.g. 12 volts @ 5 amps = 60 watts
There are zero volts in .1 amps.
41.666 amps. Divide watts by volts.
watts = volts * amps--> Amps = watts/ volts therefore; 2000/220= 9.09 amps
Amps can not give you a kilowatt with out a voltage being applied to the question. Watts = Amps x Volts. Amps = 1000/ Volts.