It really depends on the size of the vacuum or buffer. Considering that the typical outlet in a house is (approximately) 115 volts and will handle 15 amps of current, the most the generator would need to be is 115V x 15A or 1725 watts continuous power. You can check the amperage rating on your vacuum or buffer to get a more accurate answer for your situation.
650 watts
10,000 watts (10 Kilowatts).
2200
3700 max output.
Check the wattage of the blow dryer and add 500 watt. This will be the size of generator you will need to use.
About 55,970 watts.
650 watts
The estimated watts of a vacuum cleaner needed is 7 to 12 amps or 144 watts.
10,000 watts (10 Kilowatts).
2200
3700 max output.
I was asking if a portable generator is the best way and if so how many watts.
Check the wattage of the blow dryer and add 500 watt. This will be the size of generator you will need to use.
The size of a generator is based on what the connected load will be. Add up all of the connected wattages that will be connected to the generator at one time and add ten percent, this will be the size of the generator you will need. Some equipment does not show the wattage on its nameplate. To find the wattage use the following formula Watts = Amps x Volts.
If your generator is rated at 1000 watts continuous......and you are using 120V.....available amps are 1000/120 =8.3 .
There is no way to answer without knowing the wattage rating of the 9 volt generator. A generator's wattage rating depends on the size of the wire in it, the wattage of the rectifiers if it is a DC generator, and the horse power of the engine or motor that is available to turn the generator.
it depends on the power production capabilities of the generator, and the power usage of the electronic applications...this power is measured in Watts, usually just W, and all the parts should have the relative information on how much Watts they use/produce