0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
How many square feet is in 46 linear feet?
Not possible to convert a linear measure to an area measure.
Calculate square feet from linear square feet?
Feet can't be converted to square feet. Feet measure length, while square feet measure area.
12 inches is what in linear?
12 inches IS a linear measure.
How many linear meters in 9 acres?
Acres are a measure of area. Linear meters are a measure if length. They are not convertible.
What is the linear speed equation?
speed = distance ÷ time
How do you measure the thickness of a rotor?
What is a rotor?
What happen to the rotor speed and rotor current when the mechanical load on an induction motor increases?
rotor speed will decrease....the rotor current wil increase.....
What happens to the rotor speed and rotor current when the mechanical load on an induction motor increases?
rotor speed will decrease....the rotor current wil increase.....
How do you convert angular speed to linear speed?
divide the linear speed by the radius
What is the definition of linear speed?
Linear speed is defined as the speed that the body moves in a linear path. It is the distance that is traveled within a given time for a linear path.
How do you convert linear speed to angular speed?
To convert linear speed to angular speed, divide the linear speed by the radius of the rotating object. The formula for this relationship is: angular speed (ω) = linear speed (v) / radius (r). This will give you the angular speed in radians per second.
How does linear speed change as rotational speed changes?
At any distance from the axis of rotation, the linear speed of an object is directly proportional to the rotational speed. If the linear speed increases, the rotational speed also increases.
How linear induction motor work?
The linear induction motor works on the same principle as that of normal induction motor with difference that instead of rotational movement, the rotor moves linearly. If the stator and rotor of the induction motor are made flat then it forms the linear induction motor. The flux produced by the flate stator moves linearly with the synchronous speed from one end to the other. The synchronous speed is given by, v s = 2wf where v s = Linear Synchronous Speed (m/s) w = Width of one pole pitch (m) f = Frequency of supply (Hz) It can be seen that the synchronous speed is independent of number of poles but depends only one width of pole pitch and supply frequency.
When induction motor is switched on the rotor frequency is?
The induction motor rotor has different frequency compared to it's stator. The rotor has slip ( s ) frequency. slip = ( Synchronous speed - rotor speed ) / Synchronous speed Synchronous speed = ( 120 * f ) / P where f = supply frequency to the stator. p = no of poles rotor speed is the actual speed the motor is running. Frequency in the rotor = slip * frequency in the stator At starting rotor speed is zero, so slip is one. Let us take the supply frequency is 50 Hz, then rotor frequency is also 50 Hz at starting. The motor attains speed and runs with its full speed at a point of time. Then let us take the slip is 0.04 then the rotor frequency will be 2 Hz.
How many hours in 85 miles?
None. They measure different things, hours are a measure of time, miles are a measure of linear distance. The time taken to cover 85 miles would depend on your speed
Do all places on the earth have the same average speed?
Assuming the question is asking about the Earth's rotation, it depends upon how you measure speed. If you measure angular velocity, then yes, every point on earth rotates at the same speed. If you measure linear velocity, then no, points near the equator rotate faster than points near the poles. Still in linear velocity, points at higher altitude rotate slightly faster then points at the bottom of the deep ocean.
How to measure rotor thickness?
I use a micrometer the rotor should have minimum thickness stamped on the rotor is inches or millimeters
