0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
How many 50 watt lights on a 15 amp circuit?
50 watt equals less than 1/2 amp current flow at 120 volts so you can have 30 light on a 15amp breaker or 40 on a twenty amp breaker.
Can you run a 3200 watt oven on a 20 amp breaker?
a 220 volt, 3200 watt oven will draw under 15 amps, so yes a 2o amp breaker will work.
How many watts on a 40 amp circuit breaker?
about 4800 watt but should not use it 100% so to be safe 4000 watt (80%)
Will 2000 watts work on a 20 amp breaker?
The formula to use is I = W/E, assuming that the single breaker is delivering 120 volts, the amperage to the circuit is 16.6 amps. A continuous load on a 20 amp breaker has to be reduced to 80% according to the electrical code. 20 x .8 = 16. So to answer the question, yes, a 20 amp breaker will support a 2000 watt load at 120 volts.
Can 700 watt microwave compatible for 60 amp service?
As long as the voltages match a 60 amp service will handle a 700 watt microwave. The microwave will only draw A = W/V, A = 700/120 = 5.8 amps.
Will a 2000 watt four channel amp work with one 2000 watt Kicker?
yes it will
Is 4000 watt amp too much for two twelves subs?
Not if subs are rated for 2000 watts each.
What amp do you use for 2 1100 watt subs?
it depends on alot, alot of things. but id say to be safe a 2000 watt. but the best amp would be a sundown saz1500d
How much is an alpine 650 watt amp worth?
$250
I have 3 12 Q Power subs at 1500 watts a piece with a 2000 watt proacoustik amp will a 4000 watt pro acoustik amp push the 3 subs better and is Q Power a good brand of sub?
I have 2 q power 1500 watt subs and a 3500 watt proacoustic amp and it pushes it well although not enough so im sure you need more than 2000 watt to push 3 of them.
What does a sony xplode 1000 watt amp usually cost?
i found one for 65.00 new
What would happen if you connected a 12 volt light to a 2000 watt amp?
You'd blow out the light.
What is the value of a crunch 200 watt amp?
As much as someone is willing to psy
What is the cost of a Gibson Epoch 10-Watt Guitar Amp?
Most of the time they are sold for about 49.99 new
Can you wire a 2 channel amp to a dvc sub using one channel per coil?
if the sub can handle it yes....say if u have a 2000 watt amp 2 channel and u have a 2000 watt DVC sub then it will work but wouldn't advise doing that for great sound qulity
1200 watt wiring kit suitable for a 800 watt amp and 1100 watt sub not sure whether this would have a effect on the cables?
1200 Watt wiring is more than enough for an 800 Watt amp. The rating of the sub doesn't make any difference to the cables. If you want to use the sub to its rated power you should get a bigger amp. If the amp can only give out 800 Watts and the sub can take 1100 Watts then you can put a bigger amp on. It is still going to be loud as with an 800 Watt amp. I have a 300 watt amp with a 1200 Watt sub and people hear me coming.
How much does a Peavey Vyor 60 watt tube amp weigh?
48 lbs
