Best Answer

1 horsepower = 550 foot-pounds per second

30 inches = 2.5 feet

(2.5) x (220)/10 = 550 foot pounds per 10 seconds = 1/10th of a horsepower.

Q: How much horsepower is needed to lift 220 lbs 30 inches in 10 seconds?

Write your answer...

Submit

Still have questions?

Continue Learning about Natural Sciences

5inch

It would depend on the size and strength of the electromagnet, as well as the weight of the car. In general, a very strong electromagnet would likely need thousands of volts to lift a car safely and effectively.

To lift an object, you need to overcome its weight, whereas to start it sliding you need to overcome both its weight and the static friction force. The force needed to lift the object would be equal to its weight, whereas the force needed to start it sliding would be the weight of the object plus the product of the coefficient of static friction and the weight of the object. Therefore, the force needed to lift the object would be less than the force needed to start it sliding by the weight of the object multiplied by the coefficient of static friction.

A pulley decreases the amount of work needed to lift an object by distributing the force required over multiple ropes and pulleys. This reduces the amount of force needed by the person pulling the rope, making it easier to lift the object.

For 31x10.50x15 tires on a 1991 GMC Jimmy S-15 4x4, you would typically need at least a 2-3 inch suspension lift to ensure proper clearance and prevent rubbing. It's also recommended to check the wheel offset and make sure the lift kit is compatible with your specific vehicle model.

Related questions

73 seconds

Yes

if you raise the lift and duration, you will raise the horsepower.

The answer depends on the mass of the piano and the height of the floor.

There was no one inventor of the steam engine, although James Watt and Thomas Newcomen were among the first to create a workable engine. Horsepower is a measure of energy needed to do work. One horsepower is required to lift 75 kg 1 meter in 1 second.

The duration of Hare Lift is 420.0 seconds.

Upthrust is needed to lift a shuttle up RG

The duration of Lift Off with Ayshea is 1500.0 seconds.

Blades on a helicopter provide both lift and thrust, therefore, the more blades, the more lift and speed can be obtained. IT should also be noted that more horsepower is needed for the additional blades so it can be a trade off in fuel consumption.

five seconds to sign your lift stay motion

Power = (energy) / (time) =(200 newtons x 4 meters) / (4 seconds) =200 newton-meters per second = 200 watts

Originally horsepower was rated by the amount of energy required for a horse to lift a 1 pound weight 1 foot in the air = 1 horsepower