0
What else can I help you with?
How much horspower does it take to lift 800 pounds at 200 feet per minute?
To calculate the horsepower required to lift 800 pounds at a speed of 200 feet per minute, you can use the formula: horsepower = (weight in pounds × height in feet per minute) / 33,000. Plugging in the values, it would be (800 × 200) / 33,000, which equals approximately 4.85 horsepower. Thus, it takes about 4.85 horsepower to lift 800 pounds at that rate.
What are the specs of a category 2 3-point hitch?
A category 2 3-point hitch typically has a distance of 32 inches between the lower lift arms. The lower lift pins are 1 1/8 inches in diameter. The lift capacity can range from 3,000 to 5,000 pounds depending on the manufacturer and specific model.
How many volts are needed to lift an electromagnet need to lift a car?
The amount of voltage needed to lift a car with an electromagnet depends on several factors. The size of the coil, as well as the amperage will need to be factored in to know how much voltage will be used.
If the coefficient of static friction is 0.3 how much more force is needed to lift the object than start it sliding?
for lifting the object there is no role of friction,but of air friction.since no info,. is given about it so air friction = 0.thereby for lifting we have mg = mass * 9.8 (the wight of the object). and for sliding we have 0.3*mg . therefore 0.7mg of more force is required to lift it.
What is lobe lift?
Lobe lift refers to the vertical movement or displacement of the lobes in a camshaft, which are responsible for controlling the timing and duration of the engine's valve openings. It plays a crucial role in determining an engine's performance characteristics, such as power output and efficiency. Variations in lobe lift can affect how aggressively an engine breathes, influencing factors like torque and horsepower across different RPM ranges. Adjusting lobe lift is a common modification in performance tuning to optimize engine performance.
How many seconds will it take a 100 horsepower motor to lift a 10000 pound elevator 400 feet vertically?
73 seconds
Are longer shocks needed when you lift a jeep 3 inches?
Yes
Do you get more horsepower from a camshaft?
if you raise the lift and duration, you will raise the horsepower.
How much power is needed to lift the1 piano and 1 floor in ten seconds?
The answer depends on the mass of the piano and the height of the floor.
Who was the inventor of steam engine and what is horsepower?
There was no one inventor of the steam engine, although James Watt and Thomas Newcomen were among the first to create a workable engine. Horsepower is a measure of energy needed to do work. One horsepower is required to lift 75 kg 1 meter in 1 second.
What is the duration of Hare Lift?
The duration of Hare Lift is 420.0 seconds.
How much horsepower is in a space shuttle launch?
A space shuttle's main engines generated about 1.2 million pounds of thrust, which is approximately equivalent to 37 million horsepower. This immense power was needed to lift the heavy spacecraft off the ground and accelerate it into orbit.
What is the duration of Lift Off with Ayshea?
The duration of Lift Off with Ayshea is 1500.0 seconds.
What forces are needed to lift a space shuttle into space?
Upthrust is needed to lift a shuttle up RG
How long does it take a judge to lift a stay?
five seconds to sign your lift stay motion
Why does some Russian military choppers carry 2 blades?
Blades on a helicopter provide both lift and thrust, therefore, the more blades, the more lift and speed can be obtained. IT should also be noted that more horsepower is needed for the additional blades so it can be a trade off in fuel consumption.
How much power is needed to lift the 200-n object to a height of 4m in 4 seconds?
Power = (energy) / (time) =(200 newtons x 4 meters) / (4 seconds) =200 newton-meters per second = 200 watts
