For most "game room" pool tables of the big box store type (the $500 range), whatever your current flooring is, it will be adequate. For a professional level pool table with a true slate top, you are still probably OK, but if your house is very old, check with a contractor first. The slate bed alone weighs over 300 pounds, not to mention the rest of the table.
None."Cubic inch" is a unit of volume or capacity, as of a bottle or a box. It tells you how much waterthe figure can hold."Square inch" is a unit of area or coverage, as of a sheet of paper or a rug. It tells you how muchthe figure covers of the table-top or floor. No number of square inches can hold any water.
A square foot is not going to hold any water, because it's flat. You need a cubic measurements for volume.
First of all it is highly unlikely to have a square foot. But if someone does have a square foot u should specify the shoe size. e.g. a size 10 US shoe will hold 132.3 pennies.
There is not enough information. What is the height of the pool? The pool area is 648 square feet.
You put your device flat on a table or just hold it parallel with the floor. Then slide the door to the right.
None."Cubic inch" is a unit of volume or capacity, as of a bottle or a box. It tells you how much waterthe figure can hold."Square inch" is a unit of area or coverage, as of a sheet of paper or a rug. It tells you how muchthe figure covers of the table-top or floor. No number of square inches can hold any water.
300 lbs per square feet
A square foot is not going to hold any water, because it's flat. You need a cubic measurements for volume.
A square foot cannot hold water its 2 dimensional. What you see is what you get . A one cubic foot container can hold 7.48 US gallons of liquid.
A square foot of Plexiglas can hold no water. It is a flat sheet. A cube of Plexiglas would be needed.
First of all it is highly unlikely to have a square foot. But if someone does have a square foot u should specify the shoe size. e.g. a size 10 US shoe will hold 132.3 pennies.
Depends on the structural integrity of the deck.
all depends how the floor is constructed and the size of the joists, the span of the joists, thickness of floorboards. Is it a concrete floor. Is it a 'live' load like people of furniture or a 'dead' load like an unsupported wall. It the house an old building or of recent construction. A residential standard suggests 40lb per square foot. Needs confirmation though
There is not enough information. What is the height of the pool? The pool area is 648 square feet.
You put your device flat on a table or just hold it parallel with the floor. Then slide the door to the right.
The answer will depend on 4 inch slab of what material!
the cost is,hold on,we're thinking......5000$ the cost is,hold on,we're thinking......5000$