0
What else can I help you with?
How much plywood would be left after cutting 12 inch sections from a 9 foot piece of plywood?
A 9-foot piece of plywood is 108 inches long. If you cut 12-inch sections from it, you can make 9 full sections (108 ÷ 12 = 9). Therefore, there would be no plywood left after cutting the sections, as the entire length would be used up.
If you have a 16ft by 16ft box that is 3 inches deep how much pee gravel do you need?
Nor sure how pee gravel is packed, but you need enough for 64 cubic feet.
Can put cement on a plywood floor?
How much? what kind of plywood floor? Why do you need to do this??
How much plywood do you need for 650 sf of roof?
There is 32 sq ft in a 4 by 8 sheet of plywood. You would need at least 21 sheets to cover the roof.
How much dirt to fill 16ft x16in x16in?
You need 13 yrd's of fill
How much is a plywood 2x4?
17.15
How much does 3x6 plywood weigh?
A 3x6 plywood sheet typically weighs around 25-30 pounds, depending on the thickness and type of plywood.
How much chlorine do you put in a 16ft x 42inches depth pool?
You need a test kit
It costs a family 216 to have a 9ft by 12 ft wooden floor refinished. at that rate ow much would it cost them to have a 12ft by 16ft wooden floor refinished?
$384
How much plywood needed for a 20 x 20 shed floor?
You will need 12.5 sheets of 4x8 plywood.
How much water can fit in a 16ft round pool 4 ft deep?
About 6,042 gallons of water.
How much plywood for a 15 x 15 floor?
A sheet of plywood is 4' x 8'. It would take 2 sheets long (16'), and 4 sheets wide (16'), for a total of 8 sheets, with some scrap left over. Since you can't buy plywood in other sizes, really, it would take 8 full sheets.
