18 cu. ft
As you did not specify a depth, I can not provide an answer.
.21 yards of sand will fill an area 115 inches by 67 inches to a depth of 2.5 inches.
330.78 ft3
To determine how much paver sand you need for your project, calculate the square footage of the area to be covered by the pavers. Then, use a paver sand calculator to determine the amount of sand needed based on the depth of sand required for your project.
11,923,200 sq in. of sand.
just about 32 cubic feet of sand
For this, you can work out the volume of the cylinder of sand you need to fill. But you'll also need to know the density of the sand to convert this volume into weight.
If you mean 2 inches, convert that to feet. Then multiply the area by the height. The answer will be the volume of the sand, in cubic feet.
To convert the weight of the sand into a volume and find out how much you need you would need to know the density of the sand as the more dense it is the less sand there will be in a 50lb bag and the more bags you would then need to fill the yard
To determine how much sand is needed to fill a hole that measures 8 feet long, 8 feet wide, and 3 feet deep, you can calculate the volume of the hole by multiplying the dimensions: 8 x 8 x 3 = 192 cubic feet. Therefore, you would need 192 cubic feet of sand to fill the hole completely.
The area that a trillion grains of sand would fill depends on the size of the grains. On average, a grain of sand is about 0.5 millimeters in diameter. If we assume a density of about 1.6 grams per cubic centimeter for sand, a trillion grains would occupy approximately 0.5 cubic meters, which could cover an area of around 10 square meters to a depth of about 5 centimeters. However, this is a rough estimate and the actual area can vary based on grain size and packing density.
The area that 60lbs of sand will cover is dependant on how deep you want it.æ One hundred pounds of sand equal 1 cubic foot.Your customer service rep at your local storeæcan calculate how much you will need.