0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
How much water is in 100 feet 1.75 inch hose?
There need not be any water at all in the hose! The capacity of the hose is 1.67 cubic feet.
How much bark do you need if I want it 1 inch thick for 230 square feet?
230 * 1/12 = 19.166.. cubic feet = 542.74 litres
How many 20 inch x 20 inch tiles do you need to do 147 square feet?
7.35 Is what you need
How do i know how many inches i need to drop IN one linear foot to gain a four percent slope?
Since one foot is 12 inches a four percent slope is .04X12 = 0.48 inch drop
How many feet of paracord do you need per inch of survival bracelet?
For every inch of paracord you will need 1 foot
How much slope do you need for a drain pipe from a new bathroom and what do you do if there isn't enough slope?
One quarter inch per foot is standard "slope". This equates to a quarter bubble on a level. If you don't have at least one eighth of an inch "slope", your drain will not work properly and will clog constantly.
How much stone will you need to fill in 1356 inches by 18 inch by 3 inch?
42.4 cubic feet = 1.6 cubic yards (rounded)
How much water is in 100 feet 1.75 inch hose?
There need not be any water at all in the hose! The capacity of the hose is 1.67 cubic feet.
How much bark do you need if I want it 1 inch thick for 230 square feet?
230 * 1/12 = 19.166.. cubic feet = 542.74 litres
How many 20 inch x 20 inch tiles do you need to do 147 square feet?
7.35 Is what you need
How do i know how many inches i need to drop IN one linear foot to gain a four percent slope?
Since one foot is 12 inches a four percent slope is .04X12 = 0.48 inch drop
How many feet of paracord do you need per inch of survival bracelet?
For every inch of paracord you will need 1 foot
How much slope from one inlet to other?
You need a steep slope from one inlet to another.
Need to cover 2000 square feet with 6 inch wide boards how many lineal feet do you need?
4,000 linear feet.
How many square feet tile do i need for a room 9ft 11 inch by 9ft 8 inch?
Approximately 96 square feet.
How many inch by inch bricks are need to build a walk feet wide and feet long?
A single layer will require 144 bricks.
How do you install gutters?
Gutters are often installed by professionals, but you can do it yourself. If you install gutters yourself, it is important to get the slope right or they will not drain the water effectively. To start, chalk a line to mark the slope, which should be 1/2 inch for every 10 feet. If the gutter is longer than 40 feet, you will need to slope it from the middle to a downspout on each end or from each end to a downspout in the middle. Place your marks for the slope about 1 1/4 inch below the drip edge. Gutters, attachments and gutter nails can be purchased at home supply stores. Determine what you need, including attachments, before purchasing to avoid extra trips and aggravation. For detailed instructions for installing gutters, visit the Related Link.
