Around 2.5 seconds. The distance moon varies between approx 362.6 thousand km and 405.4 thousand km. At the speed of light in space (approx 300,000 km per second), the radio waves would take between 2.42 and 2.70 seconds.
The speed of something orbiting another body can be calculated from the mean altitude of the orbit and the mean radius and the mass of the body. The distance to an interplanetary probe can be calculated from the time elapsed from the sending of a communication signal to the probe until receipt of acknowledgement of the signal from the probe. The speed of the probe can be calculated by doing that twice. The rate at which time passes for an object in space can be calculated from the speed of the object.
there is a big difference between circular and linear convolution , in linear convolution we convolved one signal with another signal where as in circular convolution the same convolution is done but in circular patteren ,depending upon the samples of the signal
Linear prediction in signal processing is important because it allows for the estimation of future values of a signal based on its past values. This is especially useful in applications such as speech and audio coding, where the accurate prediction of future samples can lead to efficient compression algorithms. Linear prediction also finds applications in noise reduction and speech enhancement techniques.
Signal is the electrical(discussion is confined to electrical domain only) quantity which varies between two levels and holds some useful information.
A digital signal is a physical signal that is a representation of a sequence of discrete values (a quantified discrete-time signal), for example of an arbitrary bit stream, or of a digitized (sampled and analog-to-digital converted) analog signal. The term digital signal can refer to either of the following:any continuous-time waveform signal used in digital communication, representing a bit stream or other sequence of discrete valuesa pulse train signal that switches between a discrete number of voltage levels or levels of light intensity, also known as a line coded signal or baseband transmission, for example a signal found in digital electronics or in serial communications, or a pulse code modulation (PCM) representation of a digitized analog signal.A signal that is generated by means of a digital modulation method (digital passband transmission), to be transferred between modems, is in the first case considered as a digital signal, and in the second case as converted to an analog signal.
kapareho ng assignment namin. malamang kaklase ko to :) --------- WE LOVE PHYSICS!! :D
about 2.56 seconds
A Digital Signal can have one of two values, 1 or 0. An Analogue signal can have any value between 1 and 0. Digital signals are better for sending information as if the signal is somewhat distorted, it is still easily recognisable. Vinyl Record use analogue. Cds use Digital
Sending signals Recening signals Responding to a signal
Sending signals Recening signals Responding to a signal
If your sending unit is sending a wrong signal to your dash indicator such as no oil or low on oil when you know the level is okay, or vice-versa. Sometimes the sending unit will short out or just wear out and send the wrong or no signal at all.
DME is Distance Measuring Equipment. It is an electronic device located in an aircraft that can measure the distance between that aircraft's location and a point sending out a signal.
Please describe torque signal from engine to computer.
Sending an electrical signal along a nerve cell.
Could be a bad bulb (dual filament) and they are touching each other sending signal through parking light circuit or a bad ground sending signal searching for ground to the path of least resistance
A synapse, chemical signals called neurotransmitters cross these gaps, carrying on the signal.
Sending signals Recening signals Responding to a signal