Roughly 317.5 feet squared.
261.66
There are just a hint over 3,384 gallons in a pool of those dimenstions that is full. The pool is a cylinder 12 feet in diameter and 4 feet deep. To find the volume of cylinder, we use the formula pi times the square of the radius times the height. A circle 12 feet in diameter has a radius of 6 feet. The pi x r2 x h here is pi x 62 x 4 = 452.39 cubic feet. There are a bit short of 7.5 gallons in a cubic foot of water, and that's where the final answer comes from.
Assuming: an 8 inch inside diameter, 1 gallon of water weighs 8.345404 pounds, 231 cubic inches of water to the gallon, volume of cylinder = Pi * radius^2 * height volume=3.14 * 4^2 * (4000 * 12) volume = 3.14 * 16 * 48,000 = 2,411,520 cubic inches 2,411,520 cubic inches of water when full. -------------------------------------------------------------------------- A 4000 foot cylinder/pipe with an 8 inch inside diameter, if full of water, will contain 10,439.48 gallons of water weighing a total of 87,121.68 pounds or 43.56 tons.
The pool is a cylinder. Volume of a cylinder = (pi) x (radius)2 x (height or depth).Volume = (pi) x (12')2 x (3') = 432 pi cubic feet = 1357.17 ft3 = 10,152.3 gallons (rounded)That's the volume of the pool. I have no way of knowing how much water is in it.It could be empty, half empty, full of mud and old leaves, etc.
A cylinder measuring 12-ft high and 4-ft diameter has a capacity of 1,128 gallons. (rounded)We have no way of knowing how much water is in it. The well may dry, full of debris,or completely empty.
261.66
just bigger than a full sized football pitch
There are just a hint over 3,384 gallons in a pool of those dimenstions that is full. The pool is a cylinder 12 feet in diameter and 4 feet deep. To find the volume of cylinder, we use the formula pi times the square of the radius times the height. A circle 12 feet in diameter has a radius of 6 feet. The pi x r2 x h here is pi x 62 x 4 = 452.39 cubic feet. There are a bit short of 7.5 gallons in a cubic foot of water, and that's where the final answer comes from.
A circular tank is 12 meter in diameter and 7.5 meter in height. how much water does it hold when half full?
Assuming: an 8 inch inside diameter, 1 gallon of water weighs 8.345404 pounds, 231 cubic inches of water to the gallon, volume of cylinder = Pi * radius^2 * height volume=3.14 * 4^2 * (4000 * 12) volume = 3.14 * 16 * 48,000 = 2,411,520 cubic inches 2,411,520 cubic inches of water when full. -------------------------------------------------------------------------- A 4000 foot cylinder/pipe with an 8 inch inside diameter, if full of water, will contain 10,439.48 gallons of water weighing a total of 87,121.68 pounds or 43.56 tons.
ZERO as there is NO pressure given
Because your body should always be 70 percent always full of water
It is holding back twice as much water as it was designed to do.
there is no diameter for a diameter must have a full circle, and Mars has an elliptical orbit.
The bottom of it ... or the surface of the water ... has 452.4 square feet of AREA .To make a bottom and a 4-foot-high strip around the outside, you'd need 754 square feetof canvas.If the pool is full to 48 inches of depth, then it's holding 1,809.56 cubic feet of water.That's 13,536.4 gallons.
800 cubic feet of water weights roughly 49,941.52 (water volume times density.)
-- Find the circumference of a full circle with a diameter of 12 mm.-- The perimeter of the semi-circle is(1/2 the circumference of the full circle) + (the diameter).