0
What else can I help you with?
How much water is saved per flush with a high efficiency toilet?
about 8 liters
What are the benefits of a high pressure toilet compared to a standard toilet?
A high-pressure toilet has a stronger flush, which can help prevent clogs and keep the toilet cleaner. It also uses less water per flush, saving water and potentially reducing water bills.
What is the purpose of the toilet jet hole in a toilet system?
The purpose of the toilet jet hole in a toilet system is to release water into the bowl at a high velocity, helping to effectively flush away waste and keep the toilet clean.
Why does the toilet randomly flushes without anyone pressing the handle?
The toilet may flush randomly due to a faulty flapper valve, a high water level in the tank, or a problem with the fill valve. These issues can cause the toilet to flush on its own without anyone pressing the handle.
How do you turn pressure down at toilet flush valve?
If it's a normal household toilet you simply lower the water level in the tank that's over and behind the toilet by adjusting the fill valve. There are many different designs so I can't tell you how on your particular toilet. Some ae as easy as turning a plastic screw and some are a real pita. If you adjust it and raise the water level too much water may run over into the overflow tube and it will just keep running. If you lower it too much your toilet may not flush completely. Generally I adust mine as high as they will go without overflowing in order to get a stronger flush. I have never needed or wanted to turn down a flush.
Why does the toilet make a loud high pitched whistling noise for about 30 to 60 seconds after it is flushed?
Usually the water filling up the flush valve in the tank. If it's bugging you, you can change the flush valve to a new one.
What could be causing the loud toilet flush noise in my bathroom?
The loud toilet flush noise in your bathroom could be caused by a malfunctioning fill valve, a loose or worn-out flapper, or high water pressure in the plumbing system. It is recommended to check these components and make necessary repairs or adjustments to reduce the noise.
How does a flushmate work?
A Flushmate works by using water pressure to compress air inside a sealed tank, which then forces water out of the tank with high pressure to create a powerful flush. When the toilet is flushed, the compressed air forces water from the tank through the flush valve, resulting in a more effective and efficient flush compared to traditional gravity-fed systems.
What is the standard height of toilet tank flush lever from the floor?
They are usually about 24-26 inches high
How much water do you use by flushing the toilet?
* In the US approximately 40% of all domestic water consumed is flushed down the toilet. * an old-style single flush toilet can use up to 5.5 gallons (20 liters) of water in one flush, whereas more water efficient dual flush toilets average less than 1 gallon (4 liters) * replacing a traditional single flush toilet with a water efficient dual flush toilet saves about 21 gallons (80 liters) per person per day.
Why when you flush one toilet upstairs does the toilet downstairs make water noises?
Your water lines aren't properly isolated. when you flush the toilet and your water lines are refilling with water it can create water hammer. This is usually worse if your water pipes are either not properly supported or come in contact with wood joists or studs. You may also have very high water pressure which means a lot of air comes through with the water, try closing the water inlet a little. A loose washer on the shut off valve for the toilet can cause the jackhammer sound you describe.
How much water do you use in one time to flush a toilet in hong kong?
Due to the high number of different types of toilets in Hong Kong Island , Kowloon , the New Territories and outlying islands Hong Kong, flush volume varies.
