About 1.66 amps at 120 volts Ballasts have stickers on them that tell you the exact amps per the voltage that you are running
No. The bulb has to match the ballast wattage exactly. And you can't interchange different lamps (like metal halide) either. The ballast is specific to that wattage and lamp type. The bulb will either burn out quickly or just not work properly at all
Not recommended. It would work but shorten lamp life and may cause risk of fire. However, if you just wanted to check a lamp was capable of striking it would be ok for a few minutes. I've done the opposite in the past and used a 150w lamp with a 100w ballast. Works, but not good for any of the components, including lamp.
400 watts, but has capability up to 460 watts.
Yes.
Yes, because the "higher" watt energy saver bulb (cfl) is actually a lower watt bulb than a standard (incandescent). Always look at the actual watts, not the 'light equivalent watts'. 11 watt low energy tube = 60 watts of old-fashioned light. More light, less heat!
No. The bulb has to match the ballast wattage exactly. And you can't interchange different lamps (like metal halide) either. The ballast is specific to that wattage and lamp type. The bulb will either burn out quickly or just not work properly at all
Not recommended. It would work but shorten lamp life and may cause risk of fire. However, if you just wanted to check a lamp was capable of striking it would be ok for a few minutes. I've done the opposite in the past and used a 150w lamp with a 100w ballast. Works, but not good for any of the components, including lamp.
No, the ballast has to be matched to the lamp. 250 watt ballast, 250 watt lamp. Also be sure to match the lamp type to the proper ballast even though the wattage is the same. HPS ballast to HPS lamp, Metal halide ballast to metal halide lamp and mercury vapour lamp to mercury vapour ballast.
No, you can not use a 150 watt high pressure sodium bulb with a 70 watt ballast.
400 watts, but has capability up to 460 watts.
21 Watt
no you cant if the ballast is for a 150w bulb you have to retro fit the ballast then u can
Yes.
Yes, because the "higher" watt energy saver bulb (cfl) is actually a lower watt bulb than a standard (incandescent). Always look at the actual watts, not the 'light equivalent watts'. 11 watt low energy tube = 60 watts of old-fashioned light. More light, less heat!
Yes, provided the bulb types are compatible with the 400 watt ballast.
Depends upon the wattage rating. A 24 watt bulb will create far less heat energy than a 100 watt bulb.
A watt is a measurement of electricity, usually pertaining to light. Light bulbs luminosity is graded by wattage, such as a 60 watt bulb, 100 watt bulb and so on. You would find a watt in a light bulb, to start.