42*4 = 168 inches.
54 tiles are needed
12 * 17 = 204 square feet =============
Assuming you mean sheets measuring 4 feet x 8 feet... Six sheets exactly.
That will depend on whether them is three mice, three people, or three elephants.
6
yes
To apply weatherstripping to a house window you need such equipment as tin snips, a hammer, long-nose pliers, nails, and a putty knife. If you already have the needed equipment, you must follow the following steps: 1) Measure the height of the sash and cut the metal spring strips 2 inches longer using tin snips. 2) Open the sash and slide the stripping into the sash channel, as shown at left. 3) Hold the nails with the long-nose pliers and hammer them in. 4) Trim the stripping to fit around the pulleys and balances. 5) After installing the strips, pry them open with the putty knife, as shown at right. The spring will stick out more and help complete the weather seal. 6) Cut three strips to fit horizontally across the window. One goes along the bottom of the lower sash with its nailing flange flush along the inside edge of the window. The second attaches to the top of the upper sash. And the third attaches to the bottom face of the upper sash so it seals the two sashes when the window is closed.
This is because they needed warm weather and they needed food in the warm weather.
If you want to replace weatherstripping on your 1965 Chevy pickup you should just pull off the old stripping using your hands or pliers if needed. If you use anything metal around your vehicle doors and windows such as a pair of pliers, just be careful not to scratch your paint, or glass. If some of the stripping will not cleanly peel off the vehicle, just use a plastic putty knife to remove any left over stripping. Then use a gunk remover to get rid of any of the old glue from the old stripping. After that put the new stripping up like exactly like the old stuff.
Because they needed clothes but they needed to check the size!
First step is to take everything out of it, including the carpeting, and looking for holes or missing plugs along the bottoms and sides. Also check and make sure that your tail lights are mounted tightly and correctly. Lastly check your weather stripping and replace if needed.
three sensors that will be needed to measure the weather conditions
Relative Humidity!
Air is needed for breathing photosynthesis flight carring sound and the planets weather
People needed to measure things so they created measurements
become fat
Early settlers used quilts in cold weather.