That depends on the material of the pipe. A lead pipe would weigh more than a plastic one.
However, if you know the mass per cubic inch of the material, you can work it out, here's how you do it:
Let m = the mass of one cubic inch of the material
Let w = the total weight of the pipe
Let l = the length of the pipe in inches
then the equation you want is this:
w = lmπ(r2 - (r - 0.5)2)
Given that we want the weight per foot, we can say that "l", the length in inches, equals 12. We can also replace "r" with the outer radius of the pipe:
w = 12mπ(302 - 29.52)
w = m × 333π
w ≈ m × 1046.15
Where w is the weight of the pipe, and m is the mass of the material per cubic foot.
The diameter is 30.6mm, thickness is 2.15mm
If it is a diameter then you must be in a cylinder or domed room. To get the thickness take the external and subtract the internal then divide the result in half.
It is half the thickness (diameter) of the circular cross-section of the cylinder.
The following is copied from: How_big_is_a_cantaloupe:"A cantaloupe is usually about a half a foot in diameter or less.Roughly the size of your head."So, this equates to approximately 15 cm or less.A cantaloupe is usually about a half a foot in diameter or less.Roughly the size of your head.
A half inch thick tempered glass will weigh 6.75 lb/ft2. With that much thickness, it can support much of the weight of possibly a small child or small animal.
The Diameter is 30.6mm, Thickness is 2.15mm
The diameter is 30.6mm, thickness is 2.15mm
The Diameter is 30.6mm, thickness is 2.18mm at he rim.
If it is a diameter then you must be in a cylinder or domed room. To get the thickness take the external and subtract the internal then divide the result in half.
It is half the thickness (diameter) of the circular cross-section of the cylinder.
0.085 inches (2.15 mm) in thickness, and is twice the weight of the quarter.
The radius of any circle is one-half the diameter.
Diameter: 30.6 mm Thickness: 2.15 mm Weight (current): 11.34 gm; (40% silver): 11.5 gm; (90% silver): 12.5 gm
Use the formula area = pi times radius2 to get the area. The radius is half the diameter. A foot is 12 inches, a square foot is 144 square inches.Use the formula area = pi times radius2 to get the area. The radius is half the diameter. A foot is 12 inches, a square foot is 144 square inches.Use the formula area = pi times radius2 to get the area. The radius is half the diameter. A foot is 12 inches, a square foot is 144 square inches.Use the formula area = pi times radius2 to get the area. The radius is half the diameter. A foot is 12 inches, a square foot is 144 square inches.
The value of a 2010 gold Mandela half oz mint mark medallion can depend n a few things. The value goes by the weight, diameter and the thickness.
1/2 inch + 2*thickness of the pipe.
You would use millimetres.