0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
How many cubic inches are in a 56 inch by 10 inch by 10 inch pipe?
5,600 cubic inches.
How to reduce the diameter of pipe from 12 inch to 10 inch?
With large diameters like that you will most probably need to insert a weld-on 12 inch - 10 inch reducer at the point where the reduction is required. The pipe and reducer perimeter edges should be bevelled, say 45 degrees, for good weld penetration especially if the pipe conveys fluid under pressure.
Determine the volume of a 10 inch pipe that is 5280' long?
2,880 cubic feet.
How many gallons of water on a 10 inch diameter pipe by 12 inches long?
150
How many barrels of water are needed to fill 4800 feet of 10 inch pipe?
480 barrels
How thick is 10 gauge carbon steel pipe?
0.1406 inches or 3.57 mm (USG).
How does 10 gauge compare to 0ne eighth thick steel?
It is thicker than 1/8th inch thick steel.
How many times bigger is a 10 inch pipe than a 8 inch pipe?
Every time! lol Seriously a 10-inch pipe is 5/4 of an 8-inch pipe
What is the XXh brass pipe?
XXh in piping is a determination of the wall thickness of the pipe. XXh stands for double extra heavy (or double extra strong) under an old standard measuring system. It has the thickest pipe wall of any other. The actual thickness is dependent on the nominal pipe diameter. Present determination of wall thicknesses of pipes is called schedules. Schedule 10 pipe is the thinnest while schedule 160 is the thickest. Heavy pipe is slightly thicker than today's sch. 40 pipe, extra heavy slightly thicker than sch. 80 pipe, and double extra heavy is slightly thicker than today's sch. 160 pipe. XXh pipe is no longer in use commercially and has been replaced with schedule 160 pipe, XXh Brass or Bronze pipe is forged or molded from bronze, rather than Iron or steel. Some wall thicknesses of double extra strong pipes are: 1/2 inch nom. dia. = 0.294 inch thick 3/4 inch nom. dia. = 0.308 inch thick 1 inch nom. dia. = 0. 358 inch thick 1 1/4 inch nom. dia. = 0.382 inch thick 1 1/2 inch nom. dia. = 0.400 inch thick 2 inch nom. dia. = 0.436 inch thick
What gauge is schedule 40 pipe?
10
What is the volume of a 10 inch pipe?
Depends on if the 10" is inner or outer diameter, and the length of the pipe.
How many cubic inches are in a 56 inch by 10 inch by 10 inch pipe?
5,600 cubic inches.
What is the difference between schedule 40 and 10 gauge pipe?
The gauge of the pipe is the wall thickness. It is easier to say Schedule 40 pipe than .180 inch wall thickness. This is the SCH 40 wall thickness for a standard 12" pipe and the actual gauge thickness will vary based on pipe size and material. The larger the Schedule number, the thicker the pipe wall thickness. Pipe Schedule is also expressed in Std., X-Stg., and XX-Stg. since some thicknesses are more common than others.
What is the schedule of 16 gauge pipe?
16 gauge pipe refers to the wall thickness of the pipe exclusive of its diameter.It is 0.064 inches thick, this is a steel wire gauge measurement.Pipes are typically sold by schedule numbers. A wall thickness of 0.064 inches would correspond to pipe schedule 40 for 1/8" diameter pipe (0.068"), schedule 10 for 1/4" and 3/8" pipe (0.065") and schedule 5 for pipe diameters 1/2" to 2" (0.065"). Over 2" diameter pipe, schedule 5 (the smallest wall thickness) is thicker than 16 gauge steel.
If flow through a 10 inch pipe is 722gpm what Is the Volocity in feet?
A pipe that is 10 inch would have the velocity of 2.75 feet. This is 2.75 feet with 722 GPM.
How thick is 0.100 inches?
It is: 1/10 of an inch
Is 16 gauge steel bigger than 14 gauge steel?
GAUGE , is one inch thick of steel or metal. So, take this one inch thick of steel sheet and cut it into 12 equal thickness sheets , you get a 12 gauge steel sheet. Similarly, take this one inch thick of steel sheet and cut it into 14 equal thickness sheets , you get a 14 gauge steel sheet. and so on . So, a 12 gauge steel sheet is thicker than 14 gauge , 14 is thicker than 16 , 16 is thicker than 18 and so on. Wrong!!! See my discussion on this...
