answersLogoWhite

0


Best Answer

They are the same: 1 cubic cm = 1 mL

User Avatar

Wiki User

11y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How to convert flow rates from cubic cm per second to mL per second?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Continue Learning about Math & Arithmetic

How do you convert cubic meters per second to cubic feet per second?

35.3146667 (cubic feet) per second == Converters: * NOAA: http://www.srh.noaa.gov/wgrfc/resources/convert.html#flow


How do I convert meters per second to cubic feet per minute?

You can't. Meters per second is a straight off speed, CFM(cubic feet per minute) is a flow rate. You could convert cubic meters/second into CFM though. Here's a link that'll help you with that:http://www.heatsink-guide.com/content.php?content=conversion.shtml


How do you convert 5.3 meters per second into liters per second?

You don't. metres per second measures velocity. litres per second measures flow rate. There is no conversion. Possibly you mean 5.3 cubic metres per second - that's easier. There are 1000 litres in a cubic metre. So its 5300 litres per second. That's the flow rate of a small river. Actually you can convert flow to velocity as long as you know the internal diameter of the pipe. Where Velocity - V = m/s Flow - Q = m3/h (1 L/s = 3.6 m3/h) Diameter - D = Internal Diameter of pipe in mm V = 354 x Q/D2


How do you convert cubic feet per second in tons per hour?

You cannot. Cubic feet per second is a flow rate measured in terms of volume, while tons per hour is a measure of flow rate in terms of mass. Volume and mass are two different measures and according to basic dimensional analysis, conversion from one to the other is not valid.


How many cubic feet per second of liquid flow are in a gallon per minute?

This is a pretty straightforward conversion. One cubic foot is equal to 7.48 gallons (US). If you take the reciprocal of that figure (1 / 7.48), you can determine how many cubic feet are in one gallon: 0.134. That is, one gallon is equal to 0.134 cubic feet. So, one gallon per minute equals 0.134 cubic feet per minute. But you're not done, yet. Since there are 60 seconds in a minute, you must divide that figure by 60 to determine how many cubic feet flow in just one second. 0.134/60 = 0.00223 = 2.23E-3 cubic feet per second. That's a pretty small number to work with. It might be more useful to convert that to cubic inches per second (although you didn't ask for the answer in those units). Since a cubic foot is equal to 1728 cubic inches, you can multiply the answer above by that number: 2.23E-3 x 1728 = 3.85 cubic inches per second (in3/s).

Related questions

How do you convert cubic meters per second to cubic feet per second?

35.3146667 (cubic feet) per second == Converters: * NOAA: http://www.srh.noaa.gov/wgrfc/resources/convert.html#flow


How do you measure river flow rates in cubic meters?

It is in cubic metres!


How do you convert cubic meters per second to cubic decameters?

You cannot. Cubic metre per second is a measure of flow while cubic decameters is a measure of volume. The two measure different things and it makes no sense to try to convert from one to the other.


How do you convert Cubic feet per Minute to pounds per second of flow?

Pounds per cubic foot of volume and used to weight the two do not compare.


How many cubic inches in 1.5 cubic feet per second of water?

A 1.5 cubic foot per second flow of water equates to 2,592 cubic inches of flow per second.


How do I convert meters per second to cubic feet per minute?

You can't. Meters per second is a straight off speed, CFM(cubic feet per minute) is a flow rate. You could convert cubic meters/second into CFM though. Here's a link that'll help you with that:http://www.heatsink-guide.com/content.php?content=conversion.shtml


How do you convert 2420 cubic meters per second to feet per second?

This question cannot be answered sensibly. A cubic metre per second is a measure of volume flow rate, with dimensions [L3T-1]. A foot per second is a measure of linear flow rate, with dimensions [L1T-1]. Basic dimensional analysis teaches that in most cases you cannot convert between measures with different dimensions without additional information.


How do you convert 5.3 meters per second into liters per second?

You don't. metres per second measures velocity. litres per second measures flow rate. There is no conversion. Possibly you mean 5.3 cubic metres per second - that's easier. There are 1000 litres in a cubic metre. So its 5300 litres per second. That's the flow rate of a small river. Actually you can convert flow to velocity as long as you know the internal diameter of the pipe. Where Velocity - V = m/s Flow - Q = m3/h (1 L/s = 3.6 m3/h) Diameter - D = Internal Diameter of pipe in mm V = 354 x Q/D2


How do you convert cubic feet per second in tons per hour?

You cannot. Cubic feet per second is a flow rate measured in terms of volume, while tons per hour is a measure of flow rate in terms of mass. Volume and mass are two different measures and according to basic dimensional analysis, conversion from one to the other is not valid.


How do you convert cubic meters per second into square kilometers?

What? Cubic metres per second is a measure of flow rate while a square kilometre is a measure of area. The two measure entirely different things and according to basic dimensional analysis conversion from one to the other is pure nonsense.


How many cubic meters per second in one cusec flow?

It is actually called a cusec (cubic feet per second), not cusic. It is a volumetric unit for measuring the flow of liquids, equal to one cubic foot per second.1 ft3s-1 = 0.028316847m3s-1, 1 ft3s-1 = 1 cusec


What is the water flow volume of the Colorado River?

65 cubic metre per second