They are the same: 1 cubic cm = 1 mL
35.3146667 (cubic feet) per second == Converters: * NOAA: http://www.srh.noaa.gov/wgrfc/resources/convert.html#flow
You can't. Meters per second is a straight off speed, CFM(cubic feet per minute) is a flow rate. You could convert cubic meters/second into CFM though. Here's a link that'll help you with that:http://www.heatsink-guide.com/content.php?content=conversion.shtml
You cannot. Cubic feet per second is a flow rate measured in terms of volume, while tons per hour is a measure of flow rate in terms of mass. Volume and mass are two different measures and according to basic dimensional analysis, conversion from one to the other is not valid.
One cubic foot per second (cusec) is equivalent to approximately 28.3168 liters per second. This is a common unit of flow rate used in hydrology and engineering. To convert cusecs to liters, you multiply the flow rate in cusecs by 28.3168.
You don't. metres per second measures velocity. litres per second measures flow rate. There is no conversion. Possibly you mean 5.3 cubic metres per second - that's easier. There are 1000 litres in a cubic metre. So its 5300 litres per second. That's the flow rate of a small river. Actually you can convert flow to velocity as long as you know the internal diameter of the pipe. Where Velocity - V = m/s Flow - Q = m3/h (1 L/s = 3.6 m3/h) Diameter - D = Internal Diameter of pipe in mm V = 354 x Q/D2
35.3146667 (cubic feet) per second == Converters: * NOAA: http://www.srh.noaa.gov/wgrfc/resources/convert.html#flow
It is in cubic metres!
You cannot. Cubic metre per second is a measure of flow while cubic decameters is a measure of volume. The two measure different things and it makes no sense to try to convert from one to the other.
Pounds per cubic foot of volume and used to weight the two do not compare.
A 1.5 cubic foot per second flow of water equates to 2,592 cubic inches of flow per second.
You can't. Meters per second is a straight off speed, CFM(cubic feet per minute) is a flow rate. You could convert cubic meters/second into CFM though. Here's a link that'll help you with that:http://www.heatsink-guide.com/content.php?content=conversion.shtml
This question cannot be answered sensibly. A cubic metre per second is a measure of volume flow rate, with dimensions [L3T-1]. A foot per second is a measure of linear flow rate, with dimensions [L1T-1]. Basic dimensional analysis teaches that in most cases you cannot convert between measures with different dimensions without additional information.
You cannot. Cubic feet per second is a flow rate measured in terms of volume, while tons per hour is a measure of flow rate in terms of mass. Volume and mass are two different measures and according to basic dimensional analysis, conversion from one to the other is not valid.
It is actually called a cusec (cubic feet per second), not cusic. It is a volumetric unit for measuring the flow of liquids, equal to one cubic foot per second.1 ft3s-1 = 0.028316847m3s-1, 1 ft3s-1 = 1 cusec
One cubic foot per second (cusec) is equivalent to approximately 28.3168 liters per second. This is a common unit of flow rate used in hydrology and engineering. To convert cusecs to liters, you multiply the flow rate in cusecs by 28.3168.
You don't. metres per second measures velocity. litres per second measures flow rate. There is no conversion. Possibly you mean 5.3 cubic metres per second - that's easier. There are 1000 litres in a cubic metre. So its 5300 litres per second. That's the flow rate of a small river. Actually you can convert flow to velocity as long as you know the internal diameter of the pipe. Where Velocity - V = m/s Flow - Q = m3/h (1 L/s = 3.6 m3/h) Diameter - D = Internal Diameter of pipe in mm V = 354 x Q/D2
What? Cubic metres per second is a measure of flow rate while a square kilometre is a measure of area. The two measure entirely different things and according to basic dimensional analysis conversion from one to the other is pure nonsense.