0
the 10m is the length so... Yes
What else can I help you with?
Will a Onkyo Tx Nr509 and a Bose CineMate II work together?
No, they won't. The CiniMate II is designed to connect directly to the DVD player or game machine, and includes a built-in amplifier. The Onkyo does not have a compatible analog output for all of its signals. You should consider the AcoustiMass series of speakers which will connect to the Onkyo's amplifier outputs. The subwoofer will connect to the sub line out.
How do you connect cathode ray oscilloscope to full wave rectifier?
To connect a cathode ray oscilloscope (CRO) to a full-wave rectifier, first, ensure the rectifier circuit is powered and functioning properly. Connect the oscilloscope probes across the output terminals of the rectifier; the positive probe should connect to the positive output, and the ground clip to the common ground. Set the oscilloscope to an appropriate voltage scale and time base to visualize the rectified waveform. Finally, observe the display, which should show the full-wave rectified signal.
What does engine system fault mean on range rover sport?
it means you should connect the red wire together and the other red wire together by tieing them together. :) =)
How to I connect the VoIP phones together?
You should first read the instruction manual that explains how to connect such devices, then look for a communication hub where all the cables corresponding to the phone you want to install should be located.
How do you connect 2.1 home theater to 5.1 onida DVD player?
The DVD player should have a simple 2 channel stereo output connectors. Use these.
What is the wiring suppose to look like on the transformer?
Incoming wires connect to terminals H1, H4. Output wires connect to X1, X4. On small control transformers the X4 terminal should be grounded to the cabinet and not left floating.
How can I connect my Wii to the internet to download things and play Nintendo wifi games?
If you have a router or cat5 output near you, you can just plug an Ethernet (cat5/6) line from the output into your Wii. It should automatically connect after that. Alternative: Wi-Fi Go to settings and find network connection. Scan for access points and if you own WiFi your router should show up. Put your password in and tada! Internet!
What kind of receiver will allow you to play a mono hi-fi speaker from the 1950's when present receivers are formatted for stereo?
Any stereo amplifier these days can connect to a speaker from the 1950's. You will just have to connect one side, left or right, to the speaker. You won't get stereo. If your receiver has the option, you should select mono output to combine the signal of both channels. Never connect the left and right speaker leads together to one speaker.
Can we connect ups to inverter?
Yes, you can connect an uninterruptible power supply (UPS) to an inverter, but it's important to ensure compatibility between the two devices. The UPS should be designed to handle the output from the inverter, and the inverter should provide a stable output voltage and frequency that the UPS can work with. Additionally, be cautious of the load and total wattage to avoid overloading either device. Always consult the manuals or a professional for specific configurations.
How do you use a dvr?
Connect its input to the output of a cable box and DVR's output to your television. If you don't have a cable / satellite set-top box, and your DVR has a built-in TV tuner, connect its input to a coax cable from your wall (raw cable feed) or a TV antenna (over the air reception), and DVR's output to your television, then scan for available channels. You should be able to watch TV through the DVR and record TV shows onto it.
Can i connect multiple computers into a supercomputer?
Linking multiple computers together is known as a Computer Cluster. Look that up and you should have your answer.
Briefly explain 'h-parameter model' for BJTs?
h-parameter used to find the input and output impedence of the two port network. suppose if u connect a high load at the output port then u should take care that no current from the device will attack the network, to determine that we should know what is the impedance of the circuit.
