0
Yes mesh is the most expensive because in a mesh environment, a cable runs from every computer to every other computer. If you have four computers , you must have six cables three coming from each computer to the other computers.
Wiki User
∙ 12y ago
Add your answer:
Earn +20 pts
Which network topology is secure?
Mesh topology is the most secure topology bcoz in mesh topology each device has a dedicated link to others .
What is the most fault tolerant physical topology?
Mesh type of topology is the most reliable.
What is the function of network topology?
yes, network topology does matter to design a network. as we know that topology is a structure of network. without a topology network cannot be designed. we have to consider which topology to use and what does each topology does. different topology have its different features. if you want most secure connection use full mesh topology
Which topology would be the most redundant?
mesh topology
Which network topology is the best one?
The best topology is ring topology. Star is the next best after ringr, and then bus, which is pretty old, but not too expensive. Full mesh topology is theoretically the best since every device is connected to every other device, thus maximizing speed and security. These, however, are quite expensive to install. The next best would be tree topology, which is basically a connection of stars.
Which topology is the most commonly used server network topology?
The most common LAN topology is that of a "star." In a star topology, each computer, or "node", is connected to a central hub. This is more reliable than a more classical "ring" topology, because a node failing will not bring down the entire network. A bus topology is arguably more reliable, but has poorer performance.
What are the disadvantages of mesh topology?
There are several advantages to a mesh network topology. First, it is fault tolerant; since there is no gateway, nodes can connect to each other with no regard to the state of the rest of the network. In addition, nodes can create their own paths through the network because there is no gateway computer. One disadvantage to a mesh topology is that setup time can be quite time consuming.
Difference between star and mesh topology?
1.The star topology use a hub in the center, only one hub. So all data exchange will go throught that one hub/router to reach another computer .If the hub is down, all the network is down too. In a mesh topology, each computer in the network has its own hub/or itself, so data exchange is done directly from one computer/or its hub, to another computer/or its hub, this is more secure since only one computer will be down in a case of problem with the interface(hub/itself[network card]) 2. Star topology has minimal line cost because only n-1 lines are required for connecting n nodes while mesh topology is the most expensive network from the point of view of link cost.If there are n nodes in a network. n(n-1)/2 links are required. Hence, cost of linking the system grows with square of the number of nodes. 3.In star topology communication is not very fast between any two nodes while in mesh topology communication is very fast between any two nodes.
What network topologies are most commonly used on today's networks?
star topology. Because they include a centralized connection point; can easily be moved, isolated, or interconnected with other networks; they are, therefore, scalable. For this reason, and because of their fault tolerance, the star topology has become the most popular layout used in contemporary LANs.
What are Differences Between Star and Mesh Network Topologies?
mesh topology typically refers to a Wide Area Network where there are multiple paths connecting multiple sites. A router is used to search multiple paths and determine the best path for the data. Routes are determined by least cost, time of day and performance. A three or four site mesh network is relatively easy to create, whereas it is impractical to set up a mesh network of 100 sites or nodes. Mesh networks are used in Wide Area Networks (WANs) where reliability is important and the number of sites being connected together is fairly small. A mesh network is costly to reconfigure, replace and administer. A mesh is best suited for situations where it will not need to be moved or expanded beyond five sites or nodes. If one site fails, an entire application can fail. Also known as a star network, a star topology is one of the most common network setups where each of the devices and computers on a network connect to a central hub. A major disadvantage of this type of network topology is that if the central hub fails, all computers connected to that hub would be disconnected. Below is a visual example of a simple computer setup on a network using the star topology.
Most popular network architecture of a LAN is?
For a topology, the most common is a star topology.
What networking topology requires the most physical connections per node?
most likely a mesh
