Such a confloption sounds unlikely to suceed. if you are having to ask the question and have no local engineering advice, my suggestion is to back off such tinkering.
yes,but most people can not put their foot all the way behind their head.Some people who are very flexible probably can put their foot behind their head.
Well you put it onto the floor and wait till it moves and the part that moves first is the head.
Yes if you put them "head to tail" and the head of the fourth one points to the tail of the first one the resultant is zero.
Easily. folded to a triangle the length of the hypotenuse would be 31.11, and it would be very unlikely to find a human head that big.
Yes if people sin or lie they ecsecute them by chopping their head. Then somone in perticular takes the head and they cut through the head and take out the flesh . Then they sew the cut up and take the eyes out and sew the eyes shut. After to shrink the head they put it in herbs and some other stuff until shrunken . Finally theyput decorations on their head and hair but it is illegal in the United States .I DO NOT SHRINK HEADS!
If you have the time and money and the know how you can pretty much put any engine in any vehicle with a torch and a welder.
No
In a word ...NO !
because the clutch has gone. Try Hiflex engineering 01909 568681 (S Yorks)
where do I put trasmission fluid in landrover discovery 2
Remove the cylinder heads from your Chevy engine. Remove the head gasket and clean the head gasket surface. Put the new head gasket on and reverse the process.
you take the 2nd cord on the right and put it on the 1st on the left
A cracked block means that the engine itself is cracked. A blown head-gasket means that the gasket between the engine and the head has blown. Either can be caused by overheating the engine. When an engine overheats the head can warp causing the head-gasket to give out. In some engines the heat cracks the block. If the block is cracked, it's over. If the head-gasket is blown you can always machine the head surface and put it all back together.
Remove the cylinder head from your 1992 Chevy Lumina engine. Remove the head gasket and clean the surface. Put the new head gasket on and reverse the process.
It normally bolted to the back of the head, You can put it anywhere on the engine if you want as long as it is hooked to the engine
You will need to remove the cylinder heads from your Ford F1 50 pickup truck engine. Remove the head gasket and clean the surface. Put the new head gasket on and reverse the process.
Remove the cylinder head from your VW engine. Remove the head gasket and clean the head gasket surface. Put the new head gasket on and return the cylinder head to its original position.