Replace 1 brick with the pronumeral b.
Therefore: 2b = 1/2b + 2
This could be rewritten as: 4b = 1b + 4
Simplify this to: 3b = 4
If 3 bricks = 4kg, then to get b alone, we need to divide both sides by three:
3b 4 1
----- = ----- This means b = 1 ----- kg
3 3 3
Hope this helps :)
it equals a half a lb.
About 4.5 pounds for "average" US brick (but there is no set size for bricks in the US, so weight varies depending on actual size and clay type)
A brick weighs about 3.5 to 9lbs.
Assuming the standard size of a red clay brick 4"x8"x2-1/4", (1) CY of bricks would weight 6,912 lbs, or 3.46 tons.
Anywhere in the universe where there was some net gravitational force: however weak or strong.
If a brick weighs 1 pound plus half a brick, then the 1 pound is half a brick.So a whole brick weighs 2 pounds.One and one half bricks weigh (1.5 x 2) = 3 pounds.
About 1500 to 2100 lbs based on type and size of brick. . One cube of brick is typically +-525 bricks
Half a pound.
it equals a half a lb.
532 bricks in a pallet times about 4 1/2 pound per brick = 2394 pounds.
its R2.20 for face brick and 1.50 for common brick
3 and a half
Each full brick would weigh 16kg.
About 4.5 pounds for "average" US brick (but there is no set size for bricks in the US, so weight varies depending on actual size and clay type)
a brick costs about $1.50 per brick so a wall of 5 bricks would be $7.50.
Get a dump truck, top off the fuel tank and weigh the truck at a truck stop. Then put the bricks in the truck, top the fuel tank off again, and reweigh the truck. Subtract the weight of the empty truck from the weight of the full truck, and you have the mass of the bricks. You COULD weigh every brick individually on a balance and add them all together, but that's really a pain. You could also weigh one brick, count the bricks in the pile and figure it mathematically...but really, a Bobcat and a trip to the local Petro will be much quicker.
A brick weighs about 3.5 to 9lbs.