If the sphere has radius r and the cylinder has radius d then the rise in water level will be
4/3(pi r3) / (pi d2) which simplifies to (4 r3) / (3 d2).
Oil chemists often use spectroscopy to determine total Phosphorus content. Then they can calculate content of Phospholipids based on molecular weight of expected fatty acid species. The configuration of the content immersed in oil would be the total calculated content.
The buoyant force according to Archimedes principle is=weight of liquid displaced=((P*V)*g=PVg)...........g=acceleration due to gravioty.....
Its possible, if they are in there for long enough.
Spring balance shows remarkably less weight of yours, when immersed in the water. Your weight will be shown less as much the weight of water you have displaced.
It turns blue litmus red
50
you can use a 300ml graduated cylinder water,3different objects
Liquid immersed transformers are typically immersed in what?
Immersed Corrosion refers to a type of metal corrosion when the metal is immersed in a liquid.
take a measuring cylinder and pour some water into it . tie a piece of stone to a thread and lower it into it tillit is completely immersed.note the reading(v1).now tie a piece of wood and a piece of stone together and lower them into the water till both are comletely immersed. note the reading on the cylinder again(v2).calculate the volume of piece of wood using fomula(v2-v1) from:samit kafle kawasoti,Nepal
Oil chemists often use spectroscopy to determine total Phosphorus content. Then they can calculate content of Phospholipids based on molecular weight of expected fatty acid species. The configuration of the content immersed in oil would be the total calculated content.
take a measuring cylinder and pour some water into it . tie a piece of stone to a thread and lower it into it tillit is completely immersed.note the reading(v1).now tie a piece of wood and a piece of stone together and lower them into the water till both are comletely immersed. note the reading on the cylinder again(v2).calculate the volume of piece of wood using fomula(v2-v1) from:samit kafle kawasoti,nepal
Immersed - album - was created on 2005-04-19.
Since the difference in volume corresponds to the volume of the stopper, the volume of the stopper=30.9-25=5.9ml Thus density of the rubber stopper=mass/vol=(8.46/5.9)g/ml
I immersed the boiled egg in cold water to cool it down
If the object is fully immersed then density is (5)/(45-30) = 5/15 = 1/3 gm per mL (and since it is less than 1 the density of water, is it fully immersed without something holding it down?)
phosphorous is kept immersed in water because it reacts with air.