I don’t know
The formula you are looking for is I = W/E. Amps = Watts/Volts
I = E/R
10 Amps. Amps=Watts/Volts
There are zero amps in 1000 watts. Watts are the product of amps x volts or I = W/E, watts divided by voltage. As you can see, that if no voltage is stated no amperage can be given. Once you find the voltage of the heater then use the following equation, Amps = Watts/Volts to find the current draw of the 1000 watt heater.
Divide...
To calculate the amperage, you can use the formula: Amperage (A) = Watts (W) / Voltage (V). In this case, the heater draws 3500 watts and operates at 230 volts. So, the amperage will be approximately 15.22 amps.
You can't convert volts to amperes. Those are quite different units; that would be like converting, say, meters to seconds.
Find the block heater and look for the nameplate on it. It will be in watts. Use the following equation to find the amperage that it draws. Amps = Watts/Volts. The voltage to use for the truck will be 12 volts.
10 Amps. Amps=Watts/Volts
There are zero amps in 1000 watts. Watts are the product of amps x volts or I = W/E, watts divided by voltage. As you can see, that if no voltage is stated no amperage can be given. Once you find the voltage of the heater then use the following equation, Amps = Watts/Volts to find the current draw of the 1000 watt heater.
Divide...
To calculate the amperage, you can use the formula: Amperage (A) = Watts (W) / Voltage (V). In this case, the heater draws 3500 watts and operates at 230 volts. So, the amperage will be approximately 15.22 amps.
Watts is the product of amps x volts. To give an answer the amperage needs to be given.
You can't convert volts to amperes. Those are quite different units; that would be like converting, say, meters to seconds.
There are zero watts in 220 volts. Watts are the product of amps x volts. To receive an answer, the amperage of the device has to be stated. This amperage multiplied by the stated voltage will give you the wattage of a device.
Zero. Watts is the product of Amps x Volts. As you can see an amperage value is needed. Voltage = Watts/Amps. Volts = 200/? 20 volts
There are zero amps in a 6kW 3 phase heater. Amperage is the result of dividing the Watts by the Voltage. A = W/E. Without stating the voltage the heater operates on the amperage can not be calculated.
To answer this you have to know how many volts will be used. If you know the voltage then you can calculate the current by dividing voltage into wattage. For example; an electric heater rated at 700 watts when plugged into a 115 v outlet will draw 700/115 = 6.08 amps of current.
4500 watts is zero volts. To obtain a voltage from watts it has to be divided by an amperage.