answersLogoWhite

0


Want this question answered?

Be notified when an answer is posted

Add your answer:

Earn +20 pts
Q: If the sign weighs 350N what is the tension in N in each cable?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

A 3m longweightless beam is supported at each end by cables a painter 900N stands 1m from the left end what is the tension in each cable?

Tension in left side cable would be 600N and in the right side would be 300N.


What is the tension in each cable supporting the 560nassumed the angle O of the inclined cable is34.0 degree?

This is a physic guestion . The topic is force.


What is surface tension in hydrocarbons?

Each liquid hydrocarbon has a different surface tension.


What does the tension control on a sewing machine do?

The tension control on a sewing machine determines how tight or loose the thread in each individual stitch is. The top and bobbin thread tension is like a tug-of-war. If each side is pulling equally, you have perfect tension. Imperfect tension is evidenced by thread loops on the bottom if the top tension is too loose and the same on top if the bobbin tension is too loose.


What will be the tension in a rope that is pulled from its ends by to opposite forces100 N each?

Assuming you meant two forces, the tension will be 200N.


What component provides the static pressure to the brakes for maintaing pendant hook cable tension on a MAAS?

This will depend on what system is in use. Each Navy and in some cases what ship will make a difference. Land based systems also are different.


What is the tension of a rope that has a lantern that weighs 50 newtons on it use the parallelagram rule to defend your answer?

If you break it down the 50n is the sum of both vectors squared. Which results apprx 35 N on each side of rope which is less than the 50N.


What object weighs about 10g?

Two US nickels - each nickel weighs 5g


What is A cable with terminators at each end and is shared by all nodes?

Bus Cable


What is a cable with terminators at each end and is shared all nodes?

Bus Cable


How do you repair the emergency brake on a 1985 VW Jetta?

first thing to do is disconnect the cable between the seats--there are two 10mm nuts on each cable---then climb under the car and disconnect from the rear brakes if drum brakes take off the drumm and you will see the cable--pull back on the sping on the cable,,i lock it with a small pair of vice grips--undo it from the armature and pull it through the backing plate--then pull the cable out of the boby of the car install in reverse---put the cable on the brakes before adjusting the tension in the car good luck


How do you create a network with 14 computers?

You connect each computer to a switch, using a UTP cable. Some small switches only have 8 ports; you can connect two such switches to each other, with an additional cable. Each computer has to have a network card.You connect each computer to a switch, using a UTP cable. Some small switches only have 8 ports; you can connect two such switches to each other, with an additional cable. Each computer has to have a network card.You connect each computer to a switch, using a UTP cable. Some small switches only have 8 ports; you can connect two such switches to each other, with an additional cable. Each computer has to have a network card.You connect each computer to a switch, using a UTP cable. Some small switches only have 8 ports; you can connect two such switches to each other, with an additional cable. Each computer has to have a network card.