0
If there are 300 coins of the same type in two stacks One stack is 380 millimeters tall The other is 220 millimeters tall. Find the thickness of one coin.?
Wiki User
∙ 12y ago
2 millimeters
Wiki User
∙ 12y ago
Add your answer:
Earn +20 pts
Arrange 12 coins in square with 5 coins per side?
Two coins stacked on top of each other on each corner (total of 8) and one coin in between the corner stacks to complete each side (4 more) for a total of twelve coins.
How do you calculate the thickness of steel plates?
The answer depends on what other information you have.
How many mm is the thickness of a dime?
Cut to the chase and go to the link below if you are not interested in the empirical approach explained here. These are measurements that I took with my shiny 2005 dime and my Mitutoyo micrometer. The micrometer is in inches, and is several years old; it has gotten very little use and is in excellent condition. I converted my measurements in inches to mm. Presuming that my measurements are reasonably accurate, my dime is 1.19mm thick at the center, and 1.30mm thick at the edge. My measurement is a little different from the linked site information, which I can probably attribute to some wear on the coin, inherent limits of the micrometer, possible slight calibration error, or errors of technique. I re-measured, using 10 coins and 18 coins. Since I measure at the approximate center of the coins, and the stacks of coins rest edge to edge, I corrected for the top and bottom edges by adding to my average thickness the difference between my center and edge measures for one coin. For 18 dimes I calculate a thickness of 1.38mm For 10 dimes I calculate a thickness of 1.36mm All these measurements are telling me several things. My technique is reasonably good for "desk-top" work; my micrometer may not be as accurate or as well calibrated as I assumed; my correction factor for outer edges of stacked coins could be off and might be more accurate after several averaged measurements; there could be variability in the coins that I am not accounting for; the coins and the micrometer may not be at the correct temperature-- any number of other things may be affecting my measurements. One puzzling thing is that my measurement for the diameter of the dime is almost exactly in agreement with the link. I measure .7045 inches, and the site gives .705 inches. It's even possiblethat my measurement is closer to the actual measurement, and the site's .705 is a rounded figure. Nevertheless, this has been a lot of fun. See link for official specifications.
If you have 1.00 and 25 coins what are the coins?
You could have 5 quarters or 10 dimes and one quarter or several other combinations of coins.
What are the coins of you have two US coins totaling 55 cents and one of the coins is a nickel?
The other coin is the half-dollar coin.
How thick is 2.5 mm?
It is 0.19685 inches. That is a little less than the thickness of two nickels and a dime stacked together. If you prefer the Euro, it is a little more than two 2-Euro coins stacked on top of each other.
Arrange 12 coins in square with 5 coins per side?
Two coins stacked on top of each other on each corner (total of 8) and one coin in between the corner stacks to complete each side (4 more) for a total of twelve coins.
How you stacks object on top of each other?
PowerPoint stacks these objec on top of each other in the other in which they inserted or drawn
What is the thickness of a Bank of England coin?
The Bank of England is not in the coin making business, they produce banknotes, amongst other things. The Royal Mint produces coins and the thickness of any given coin will depend on the denomination and the year of the coin concerned.
Stacks or grana are connected to each other by?
lamellae
What are the things that bind dollar bills in stacks called?
Currency straps are used to bind dollar (and other denomination) bills in stacks.
What unit would you use to measure the thickness of a hair?
Units aren't used to measure anything. After you complete the measurement, using equipment suited to the purpose, you use units to describe the result of your measurement, and to tell other people about it. I would measure the thickness of a hair using a micrometer, and express the result in millimeters.
What are the properties of veneer?
A veneer is a thin decorative cover that is applied to a wood surface or any other material. It is less than 3 millimeters in thickness, and glued onto flat panels of particleboard, fiberboard, or wood.
What instrument is used to measure the thickness of a steel ruler?
Calipers, of which there are many types, are used to measure thickness. The most common type is the Vernier Caliper.
What is the average size of a dime in cm?
The thickness of the US dime is 1.35 millimeters. That's the same as 0.00135 meter, or 0.00000135 kilometer. You could use whichever of those you like, to remember the thickness of a dime or discuss it with other people. They're all correct. But the millimeter produces the most convenient number.
What state is the speed stacks in?
The Speed Stacks Competitions are not in any one state, but are held in many states and also in other countries. If this is not the answer you are looking for, try being more specific.
Is 25 millimeters the same as 250 millimeters?
? No, they are completely different - one is 25 and the other is 250.
