Two ways of looking at it - both give the same answer.
(A) 1 foot is 12*2 = 24 times half an inch. So your scaling reduces everything to 1/24 of its real size. So something that, after reduction is 10 inches, would have been 24*10 = 240 inches or 20 feet.
(B) The second scaled down length (10 inches) is 20 times as long as the first scaled down length (1/2"). So the second unscaled or real lengthis 20 times the first ie 20*1 foot = 20 feet.
17/0.5 = 34 Therefore, 17 inches would be equivalent to 34 feet.
Area = 22/7*72 = 154 square inches
It was 48 inches high !
1 feet has 12 inches. So 5 feet will have 5*12 = 60 inches. On a 4 inch scale (where 4 inch = 1unit), 5 feet will have 60/4 = 15 units.
Neither they are equal! Make sure you are not using this to cheet!
17/0.5 = 34 Therefore, 17 inches would be equivalent to 34 feet.
12 gauge equals 0.0808 inches or 2.0525 millimetres, if using the American wire gauge (AWG) scale.
Area = 22/7*72 = 154 square inches
It was 48 inches high !
One centimeter is equal to about 0.39 inches. Using that conversion, sixty centimeters would be equal to almost 24 inches.
One centimeter is equal to about 0.39 inches. Using that conversion, sixty centimeters would be equal to almost 24 inches.
According to Weber, the height of a Weber Smokey Mountain cooker is forty-one inches tall when assembled. That equals 104.41 centimeters using the metric scale.
You can convert 9mm to 0.354331 inches using a mm to inches converter.
It's about 1.4 using this scale: http://faculty.washington.edu/mbarreto/courses/gpa.html
In a way yes.. You measure from the ground to the withers in hands 1 hand equals four inches. So if you measure your fingers and one of them equal four inches, you could measure a horse! Good luck!
Using GPS coordinates, a minute equals a nautical mile at the equator. A nautical mile is equal to 6,076 feet. A statute mile is equal to 5,280 feet. A minute equals 1.15 statute miles.
No solution.