Want this question answered?
10 cm from the mirror.
In transformations a reflection across the x axis produces a mirror image
It refers to the reflection of an object across some line.
It is a line of symmetry
The formula to work it out is Pi x Radius2. The rest is up to you !
on the 88 ranger the switch is above your rearview mirror located on the ceiling on the 88 ranger the switch is above your rearview mirror located on the ceiling
It's a matter of owner preference, but typically it's centered over the vanity cabinet. * or you can build a valence box that runs full length with lighting inside it, and forgo the centering
I don't know. However it is great luck to find a mirror on the ceiling.
This would be a mirror with when you look at it, the center of the mirror is deeper than the sides surrounding the center. convex would be the opposite with the center closer to you than the sides.
A plane mirror is not curved so it does not have a center of curvature. Or if you want to be mathematically correct, you could say that it's center of curvature is at an infinite distance from the mirror.
The center of the spherical reflecting surface of the mirror is called the pole of the mirror.
The height is usually based on the type of mirror that is to be installed above the sink. Take the height of the sink plus the height of the mirror and add 6 inches to find the center for the placement of the fixture junction box. If there is to be a space between the sink and the mirror add that measurement in to factoring of the height.
A plane mirror is not curved so it does not have a center of curvature. Or if you want to be mathematically correct, you could say that it's center of curvature is at an infinite distance from the mirror.
It is the center of the imaginary sphere to which the mirror belongs.
5
You look in the mirror to see what you saw. Grab the saw cut the table in half. two half make a whole. Jump out the hole.
10 cm from the mirror.