answersLogoWhite

0


Best Answer

There are two ways to do it. The easiest is just to put a built-in motion sensor on the one light. The switch would have to be on for the motion sensor to work. If you just want the motion sensor to work without a switch, you need to run unswitched power directly to the light.

User Avatar

Wiki User

13y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: If you have two exterior lights on a switch and need one of them to be a motion censer?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

1996 ram driving lights relay located?

The exterior lights do not have a relay. They are directly turned on by the headlight switch.


Why won't my exterior brake lights go off?

brake light switch is bad


Why do the exterior brake lights stay on with the key out of the ignition of a 96 Jetta?

Brake Lights Do NOT turn offUsually this is caused by the brake light switch being out of proper adjustment [most likely], but it also could be caused by a defective switch [less likely].


Why is your range rover stuck in neutral?

its the brake switch censer under the brake peddle itself.


Why would your headlights and dash lights blink on 1999 Geo Tracker?

Blinking lights on dash and exterior lights may indicate a bad ground wire or a faulty headlight switch. Both would cause those problems.


Why does the the exterior car lights of my 1987 300zx come on by themselves in the middle of the night I always make sure the headlight switch is turned off and I check but lights still come on?

Most problems I have had with lights end up being the switch on the sreering columb. I have replaced 4 of them for all different reasons.


1999 ford explorer dash lights are inoperative exterior lights all work but none of the dash cluster lights come on any ideas?

I hate to ask , but did you check the gauge panel dimmer switch ( just to the right of your headlight switch on your dash ) to see if it has been rotated all the way down ?


motion sensors lights?

Discover the perfect motion sensor lights to illuminate your space and enhance security. Our reliable motion sensor lights are designed to provide bright and efficient lighting whenever you need it most. Say goodbye to stumbling in the dark and trust our top-quality lights to keep your space well-lit and safe. Shop now for the best selection!


What could be causing the dash lights to flicker dim and die in a 96 Plymouth Voyager when exterior and other interior lights still work?

loose connection to the dimmer switch. Check the dimmer switch by dialing off low - hi and back a few times while you have the parking lights on. Also check for a lose fuse.


I put a 99 gsxr 750 in my 97 gsxr Crank censer was different so i swapped it Is that be the reason the motor has no fire If so how can i make the 99 four wire censer work?

You need to switch out the wire harnesses to the engine.


Do they make can lights with motion detectors?

Not that I have ever seen. The best thing to do is replace the switch controlling the can lights with a motions sensor switch like this: http://www.amazon.com/Leviton-PR150-1LW-Infrared-Occupancy-Residential/dp/B0007N72PG/ref=sr_1_1?ie=UTF8&qid=1417896541&sr=8-1&keywords=motion+sensor+light+switches


Are outdoor flood lights common?

Yes outdoor flood lights are very common. You also have a choice between motion activated or just a flip of a switch. You can find them in any hardware store like HomeDepot.