answersLogoWhite

0


Want this question answered?

Be notified when an answer is posted

Add your answer:

Earn +20 pts
Q: If your house still has some knob and tube wiring does current electrical code require it all be replaced when new electrical work is done?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

Electrical housing Wiring that has been pierced should it be replaced?

Yes.


Do Murray Feiss chandeliers require any special electrical wiring to be done?

No, there is no additional or different wiring necessary to install a Murray Feiss chandelier. They will work with most lighting electrical components.


Should you replace your house wiring after a house fire?

The electrical inspector will make this decision as to what circuits should be replaced.


You had the alternator replaced now having electrical problems?

Electrical "Problems" Following Replacement of AlternatorUsually this is an indication that the electrical wiring system is "screwed up."Either there was an existing problem, leading to the need to replace the alternator, OR whoever changed the alternator screwed up the wiring.


What job does this current wiring transmitter installes and repairs electrical systems in houses and other buildings?

an electrician


Can electrical wiring interfere with cell phone reception?

Electrical wiring with current flowing through it produces an electromagnetic field. That magnetic field can interfere with other electromagnetic radiation, such as the radio signal that are produced and received by a cellular phone.


What size underground wire do you need from house to building 120 feet away?

The most significant part of the equation is, what will be the maximum current draw? If it's to be a small current draw, for example 40 Amp service (40 amp breaker), you'll use 8AWG wire that's rated for direct burial. Higher current rating will require larger wire. As always, if you have any questions about the proper wiring or how to connect electrical service, contact a local electrical contractor. Understand that improper wiring can result in fire and/or death.


What is SIC 3643?

The current-carrying wiring devices industry is comprised of establishments principally engaged in manufacturing current-carrying wiring devices, primarily interior electrical components used to connect equipment to a power source.


What can cause a fuse to blow?

Fuse's are used to limit electrical current to a "safe" level within an electrical appliance. Since the fuse has blown it indicates that something as happened within the television which is causing it to draw an excessive amount of electrical current. The most likely cause is that a component has failed in a "shorted" state. Identifying the specific component will require some experience in electronic troubleshooting.


How do electrical insulators help people?

The insulator I refer here is the insulation on the wiring and this helps any in not passing current through them


What is electrical wiring connection in domestic house in India?

domestic electrical wiring designig


What type of wiring is considered as old wiring?

Old wiring refers to electrical wiring systems that were commonly used many decades ago. This includes aluminum wiring, knob-and-tube wiring, and cloth-covered wiring. These types of wiring may not meet current electrical safety standards and can pose a higher risk of electrical problems or safety hazards in homes and buildings.